Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Fountainebleau: Built for Hurricane Code, Not Just Curb Appeal
Custom and geometric windows in Fountainebleau cost between $1,200 and $4,800 per opening installed when they’re impact-rated, with large arched or radius units running $2,500 to $5,500. The single biggest cost driver here isn’t the glass, it’s the Miami-Dade NOA paperwork and the masonry modifications that older concrete block homes require before a non-standard shaped window ever gets set. If you’re pricing a whole-home replacement for a 1960s-1980s Fountainebleau ranch, budget $8,000 to $25,000 depending on opening count and frame material. Call (727) 620-6983 for a free in-home measure and a written line-item quote, no change orders after the fact.
Winslow Windows & Doors has been installing custom and geometric windows in Fountainebleau long enough to know that most shops quote the window and forget the opening. On a 1972 concrete block ranch off Fontainebleau Boulevard, our crew replaced a set of original jalousie windows with custom arched impact-rated casements from PGT. The original jambs were so corroded from decades of wind-driven rain that we had to install new pressure-treated bucks and re-flash the masonry pockets before the new Miami-Dade NOA-stamped units could be set. That’s the difference between a quote you sign and a price that holds. Ed Winslow’s name is on the door and on every job we do. Call (727) 620-6983 and you’ll get a live person, 24 hours a day.
Key Takeaways:
- Every custom or geometric window in Fountainebleau must carry a Miami-Dade County Notice of Acceptance (NOA), not just a Florida Product Approval, or the permit fails before installation begins.
- Most Fountainebleau homes are concrete block ranches built 1960-1985, which means original aluminum jalousie frames corrode in coastal humidity and the rough openings usually need buck modification or masonry infill.
- Typical installed pricing: $1,200-$4,800 per custom impact window, $2,500-$5,500 for large arched or radius units, $8,000-$25,000 for whole-home packages.
- Winslow is locally owned by Ed Winslow, installs PGT, Therma-Tru products, and backs every job with the Done Right Promise.
Why Fountainebleau’s HVHZ Code Changes Everything About Your Window Order
Fountainebleau sits in unincorporated Miami-Dade County’s High Velocity Hurricane Zone, the strictest product-approval standard in the nation. That means every custom or geometric window, even a non-impact decorative unit, must carry a Miami-Dade County Notice of Acceptance. A Florida Product Approval number alone is not enough here. We see this exact problem when Broward-based window companies take Fountainebleau jobs without checking the distinction: Miami-Dade Building Department permit reviewers require the specific NOA number for every product on the job before issuing approval. Out-of-county contractors who arrive with windows carrying only the FL number routinely fail inspection and face costly re-orders. We don’t make that mistake because we pull Fountainebleau permits weekly and know exactly what the plan reviewers on Northwest 7th Street will flag.
This is also why our Custom & Geometric Windows team specifies Miami-Dade NOA-stamped units from the first site visit. A geometric trapezoid window over a front door on a house near Fountainebleau Park is not a stock item. It’s a fabricated unit with a design pressure rating matched to the opening. In Fountainebleau’s wind-speed envelope of 170+ mph, that rating matters. We don’t guess at it; we engineer the opening and the product together, then hand the permit office the exact NOA number they need to sign off.
Why Winslow Windows & Doors Is Fountainebleau’s Preferred Custom & Geometric Windows Company
We’ve been installing impact-rated windows and doors in Fountainebleau since 2011, which means we’ve worked on the specific housing stock here longer than most of the national chains have had a South Florida division. Fountainebleau is dominated by concrete block structure ranch homes built between roughly 1960 and 1985. The original windows on these houses are aluminum-frame jalousies or single-hung sliders sized to pre-Andrew standards. That’s not a simple swap-out; it’s a structural modification. We’ve done enough of them that we can tell you before we measure whether your jambs will need new pressure-treated bucks or masonry infill, and we’ll write that into the quote so you’re not surprised at inspection.
Fountainebleau homeowners who call Winslow get Ed’s direct accountability, not a ticket number from a call center. Every technician who arrives at your door is background-checked and in uniform, identity verified before the first handshake. Our published address and license number are available to any Fountainebleau customer who asks, and we don’t hide behind shell companies. A neighbor you can call at 2 a.m. and someone will actually answer.
Our Custom & Geometric Windows Services in Fountainebleau
Custom Impact Windows
Custom impact windows in Fountainebleau are not a luxury, they’re a code requirement once you replace an original jalousie or single-pane unit in this HVHZ. We fabricate impact-rated custom windows to fit the non-standard rough openings common in 1960s-1980s concrete block homes along Fontainebleau Boulevard and the residential streets off Northwest 107th Avenue. These units carry full Miami-Dade NOA product approval and are installed as fast as a single day once your units arrive, though custom fabrication typically runs 4 to 6 weeks from final measure to delivery.
Geometric & Shaped Windows
Triangles, trapezoids, pentagons, and half-rounds are common in Fountainebleau’s ranch homes, especially where original builders added decorative gable accents or angled bump-outs. A shaped window over a front entry or in a gable end has to be cut, framed, glazed and rated to the same Miami-Dade wind standards as a standard rectangle. We order each geometric unit from PGT or ViewLux with the exact NOA stamp for the specific configuration, then install and flash it the same way we’d do a 40-foot commercial curtain wall: step-flashed, sealed with marine-grade polyurethane, and water-tested before we leave.
Arched & Curved Windows
Arched windows in Fountainebleau homes often fail because the original units were never flashed properly, just set in a bead of cheap sealant that breaks down under wind-driven summer rain. We see this all the time on older ranches near the Fountainebleau Park area, where arched openings over front doors or living room picture windows have been letting water wick into the concrete block for years before anyone notices the interior drywall rot. Our arched and curved units are custom-fabricated to the exact radius of the existing opening, then set in new pressure-treated bucks with re-flashed masonry pockets. The difference is visible at the first heavy afternoon storm.
Oversized Openings
Fountainebleau ranches from the late 1970s and early 1980s often have full-width living room window walls originally built as single-pane aluminum sliders. Replacing those with modern impact-rated oversized openings means the header has to be evaluated, the rough opening re-squared, and the new unit engineered to a design pressure that matches the opening span. We do this regularly on homes near the residential streets off Northwest 12th Street and Fountainebleau Boulevard. A large custom opening can run $2,500 to $5,500 installed, but it transforms the thermal envelope of the house and eliminates the single biggest wind-rain entry point in the structure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fountainebleau
Winslow Windows & Doors installs elite impact-rated brands that carry Miami-Dade NOA product approvals for Fountainebleau’s HVHZ. We’re authorized installers for PGT, Therma-Tru, and ViewLux, and we order custom geometric and arched configurations directly from those manufacturers to match the exact opening, design pressure, and NOA number your permit requires. Because we stock common replacement hardware and sealants locally for our South Florida service area, turnaround on Fountainebleau jobs is faster than shops that wait on a warehouse 200 miles north. We don’t install products outside this approved lineup, and we never substitute a Florida Product Approval window where a Miami-Dade NOA is required. If it’s not right, the Done Right Promise covers it.
Common Custom & Geometric Windows Problems We See in Fountainebleau Homes
- Corroded aluminum frames on original jalousies. The non-anodized aluminum used on 1960s jalousie windows oxidizes fast in Fountainebleau’s humid, salt-tinged air. Sash tracks bind, glass loosens, and within a few years the window won’t close tight enough to keep wind-driven rain out of the wall cavity.
- Sealant failure around geometric and arched units. Builders in the 1970s and 1980s used cheap silicone or acrylic caulk that hardens and cracks. Under repeated summer afternoon storms, water wicks into the concrete block around the jamb and rots the interior drywall from the inside out.
- Non-impact windows with Florida Product Approval only. We regularly see jobs that failed Miami-Dade plan review because a previous contractor ordered windows with an FL number but no NOA. The homeowner paid for the units, then paid again for re-orders and weeks of delay. We check the NOA before we ever place the order.
- Undersized headers above oversized openings. When original single-pane aluminum sliders are replaced with heavier impact-rated units, the existing header has to be checked. On some 1960s Fountainebleau ranches, the header was never engineered for the dead load of a triple-glazed impact window, so we spec a new LVL header or steel flitch plate before installation, not after inspection fails.
Pricing for Custom & Geometric Windows in Fountainebleau, FL
Here’s what you can expect to pay in Fountainebleau right now. A custom impact single window runs $1,200 to $2,500 installed, depending on size and frame material. A filled geometric unit like a triangle or trapezoid runs $1,500 to $3,800 because every cut is custom and the NOA paperwork is unit-specific. Arched and radius windows run $2,000 to $5,500 installed. Large oversized openings that span 8 to 12 feet run $2,500 to $5,500 depending on header work. Whole-home packages on a typical 1,600 to 2,200 square foot Fountainebleau ranch run $8,000 to $25,000 or more, depending on count, configuration, and whether we’re doing buck modification or masonry infill on original jalousie openings. Call (727) 620-6983 and we’ll come measure, write up a line-item quote, and give you a number that won’t change when the permit comes back.
What Custom & Geometric Windows Costs in Fountainebleau
Impact windows generally run $800 to $1,500 per window installed. Impact single-hung units run $900 to $1,800. Large or custom openings run $2,500 to $5,000. Whole-home packages run $8,000 to $25,000 or more. What moves the price in Fountainebleau specifically: the number of openings (obvious), the wind zone (Fountainebleau is in Miami-Dade’s 170+ mph design envelope, so every unit must be rated for that load, not a lower Broward standard), the floor height (second-story openings require different anchoring and sometimes a different design pressure rating), and the frame material (aluminum versus vinyl versus composite). We charge a free in-home measure and provide a written line-item quote with no change orders after the fact. No trip charge inside our home county, and a permanent 10% discount for seniors and veterans.
Think about the long game. A cheap inland-spec window might save you $300 per unit today, but in Fountainebleau’s humidity and salt air, the non-marine hardware starts corroding within three to five years. The sealant fails, the track binds, and you’re paying again. A coastal-spec custom impact window with marine-grade hardware and a Miami-Dade NOA lasts decades. The price gap is real, but the cheap spec costs more within ten years, every time. Impact windows versus hurricane shutters: shutters only work if someone is home to hang them and the panels are stored where you can find them. Permanent impact windows protect the house every hour of every day, no panels to hang. That’s the smarter play in Fountainebleau.
Florida Pays You Back
Fountainebleau homeowners can stack real incentives when they install impact-rated custom and geometric windows. My Safe Florida Home matching grants up to $10,000 are available for qualifying wind-mitigation upgrades. Florida sales tax is exempt on impact-resistant windows and doors. The federal 25C energy credit covers 30% of product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection ($75 to $150), many Fountainebleau homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. We can’t guarantee what your carrier or the program will approve, but we’ll provide the documentation your inspector needs: NOA numbers, design pressure ratings, and installation photos showing proper anchoring and flashing. Every unit carries the specific Miami-Dade NOA and Florida Product Approval numbers for that configuration. No rating above +100 is ever needed in Fountainebleau’s HVHZ, and we never specify a unit that exceeds what the opening requires.
We Also Serve Cities Near Fountainebleau
If you live in Miami, Hialeah, Doral, or Coral Gables, our Custom & Geometric Windows in Fountainebleau team works in those areas every week. We know the specific permitting and building-code differences between Miami-Dade’s HVHZ and the surrounding municipalities, and we apply the same NOA verification and framing standards to every job, regardless of ZIP code. Call (727) 620-6983 for a free estimate anywhere in the surrounding metro.
Serving Fountainebleau, FL - Our Local Coverage Area
We’re based in the Fountainebleau area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom & Geometric Windows in Fountainebleau
Yes. Every window or door replacement in Fountainebleau, impact-rated or not, must carry a Miami-Dade County Notice of Acceptance. Fountainebleau is in unincorporated Miami-Dade’s High Velocity Hurricane Zone, where the county standard supersedes the statewide Florida Product Approval. A non-impact geometric window with only an FL number will fail plan review. We pull Fountainebleau permits weekly and verify the NOA on every unit before we order, so your job doesn’t stall at the permit desk. Call (727) 620-6983 to talk it through.
Usually no, and that’s a good thing to know before you sign a quote. Original jalousie openings in Fountainebleau’s 1960s-1980s concrete block homes were sized to pre-Andrew standards, and modern impact-rated frames need more depth and anchoring than those old aluminum tracks. Most of these jobs require buck modification or masonry infill to bring the rough opening square, plumb, and deep enough for the new Miami-Dade NOA unit. We do that work in-house and write it into the quote upfront, not as a change order. Call (727) 620-6983 for a free in-home measure.
Low-E insulated impact glass on a Fountainebleau concrete block ranch typically cuts heat gain through glazing by 30 to 50 percent compared to original single-pane aluminum, which translates to real cooling-cost reductions in the summer months when FPL rates peak. The concrete block itself holds heat, so the window upgrade doesn’t turn the house into an icebox on its own, but combined with the air-sealing we do around the new bucks, most homeowners notice a measurable difference within a full season. For an exact estimate on your house, call (727) 620-6983.
Only if it carries a Miami-Dade NOA, and that’s where Broward shops trip up. Most Broward-based companies stock windows with Florida Product Approval numbers because that’s all Broward County requires. Fountainebleau’s Miami-Dade plan reviewers reject those permits and the homeowner eats the re-order cost and weeks of delay. We verify the NOA on every arched and custom unit before we order from PGT or because we’ve seen enough failed inspections in Fountainebleau to know the exact standard. Call (727) 620-6983 and we’ll show you the NOA paperwork for your specific window before you spend a dollar.
The coastal-spec version runs about 15 to 25 percent more per unit, typically $300 to $800 difference on a custom arched or geometric impact window. That gap pays for marine-grade stainless hardware, a better polyurethane sealant system, and a frame finish designed to resist salt-air oxidation. The inland-spec version uses standard hardware and sealant that start corroding and cracking within three to five years in Fountainebleau’s humidity and wind-driven rain. Buy the cheap version and you’ll be replacing tracks, sashes, or the entire unit within a decade. We spec the coastal version on every Fountainebleau job because it’s the right call. For an exact quote, call (727) 620-6983.
Call Winslow Windows & Doors for Custom & Geometric Windows in Fountainebleau
Ed Winslow founded this company in 2011, and his name is still on every job we do in Fountainebleau. We’re locally owned, owner-operated, and we publish our address and license number because we have nothing to hide. Every job is backed by the Done Right Promise. If it’s not done right, we make it right. Call (727) 620-6983 today for a free in-home measure and a written quote on custom impact windows, geometric and shaped windows, arched and curved windows, or oversized openings in Fountainebleau. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fountainebleau since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.