Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterVinyl Impact Windows in Fountainebleau, FL | Winslow Windows & Doors
Vinyl impact windows give Fountainebleau homeowners a practical way to meet Florida’s High-Velocity Hurricane Zone code without the upkeep of wood or the cost of aluminum-clad alternatives. The frame is rigid multi-chamber vinyl, the glass is laminated with a PVB interlayer, and the result is a window that handles impact, wind pressure, and daily coastal humidity equally well. Winslow Windows & Doors has installed these across the PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines throughout Fountainebleau, and we size every order to the home’s exact wind zone. Call (727) 620-6983 to start with a free on-site measurement and line-item quote.
Product Overview - Vinyl Impact Windows
Vinyl impact windows combine two things Florida homes actually need: laminated impact glass that holds together under a strike, and a vinyl frame that never rusts, never needs paint, and never swells from humidity. That’s why so many Fountainebleau homeowners land on this profile when they’re replacing original single-pane windows or planning a remodel near the water.
The frame is built as a multi-chamber extrusion. Those chambers do two jobs. They add structural rigidity, which matters when a window has to carry a design pressure rating up to +/-100. And they act as thermal breaks, reducing heat transfer through the frame itself. It’s a low-maintenance exterior with real engineering inside it.
The glass is laminated impact glass, which means two or more panes bonded around a PVB (polyvinyl butyral) interlayer. When something hits the glass, the outer pane may crack, but the interlayer keeps the sheet in place in the frame. That’s the entire point in a hurricane zone: the window stays closed, which keeps the building envelope intact and prevents wind-driven rain and pressurization damage.
This profile is available across every operable style in the collection: single hung, horizontal slider, casement, picture, and architectural shapes. So whether the home is a mid-century ranch on a quiet Fountainebleau street or a newer two-story with large fixed glass facing the water, the same laminated system scales to fit. Low-E insulated glass is also available for homes where cooling load is a concern, which is most of them.
Technical Specifications
Frame
- Material: Multi-chamber vinyl extrusion, engineered for HVHZ wind loads
- Hardware: Corrosion-resistant locking hardware and stainless steel rollers on sliding configurations
Glass
- Laminated Impact Glass: PVB interlayer, impact-rated, tested under TAS 201 and TAS 203
- Low-E Insulated Glass: Available on qualifying configurations for energy performance
- Tinted Glass: Available in gray, bronze, or green tints for glare and heat control
- Clear Glass: Maximum daylight transmission for interiors that need light
Finishes
- Interior/Exterior colors: White, Almond, Bronze, Black, Tan
Design Pressure
- Rating range: Matched to your wind zone, up to +/-100. Never over-sold beyond what the home requires.
Exact glass makeups, reinforcement, and pressure ratings are confirmed per opening during the quote process, because a second-story window on the windward side of a Fountainebleau home has different requirements than a ground-floor window on a sheltered street. That’s how the NOA system works, and we don’t skip that step.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass carries a PVB interlayer bonded between panes. Under impact, the interlayer holds the broken glass in the frame, keeping the opening sealed. This is the core protective mechanism that allows impact windows to protect a home’s interior even when the glass itself is hit.
Miami-Dade NOA / Florida Product Approval
Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are issued per configuration, not per product line. Your specific quote will list the approval numbers for your exact sizes, glass makeups, and frame types. We verify these before ordering so your permit submittal in Fountainebleau goes through without delay.
FBC / HVHZ Compliance
The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That means the frame, glass, anchoring, and installation method are all designed as one unit to meet the code provisions that apply to Miami-Dade and Broward wind zones and to Fountainebleau’s location within them.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a family of protocols. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading to simulate a passing storm, and TAS 203 covers forced-entry resistance. Products carrying the relevant approvals have passed these tests for their specific configurations.
Design Pressure for Your Wind Zone
We size design pressure to your wind zone, up to +/-100, never higher. There’s no benefit to paying for a window rated beyond what your elevation and exposure require, so we match the rating to the opening and the site. You’ll see the exact DP on your line-item quote.
Energy Performance
Low-E and insulated glass options are available on this profile. Homes in Fountainebleau run air conditioning for most of the year, so Low-E is worth considering for east- and west-facing walls where solar load is highest. We’ll walk through the trade-offs in the quote so you can decide with real numbers.
Color & Glass Options
The vinyl finish options are White, Almond, Bronze, Black, and Tan. White and Almond are the most common choices across Fountainebleau, particularly on older Florida ranch homes and stucco exteriors. Black has become increasingly popular on modern and transitional homes, and it works well as a contrast against light stucco. Bronze and Tan suit the warmer Mediterranean and Spanish-influenced facades you see throughout the neighborhood, blending with tile roofs and earthy exterior paint.
Glass selection depends on what each room needs. Clear laminated glass brings in the most natural light, which suits living rooms and north-facing walls. Tinted glass reduces glare and solar heat, a real benefit on western exposures where afternoon sun hits hard. Low-E insulated glass offers the strongest energy performance, particularly when you’re replacing single-pane windows and want to cut heat gain without darkening the interior. We’ll quote any combination, per opening, so you’re not paying for Low-E in a shaded bedroom unless you want it.
Installation by Winslow Windows & Doors in Fountainebleau
An impact window system is only as good as the installation that anchors it. The NOA-rated assembly assumes a properly prepared opening, a level and plumb frame, correct anchoring, and a continuous perimeter seal. Skips on these details, and the window will still pass a visual once-over but won’t perform to the tested standard when it matters.
Our installation process in Fountainebleau starts with a pre-install inspection of every opening. We check the existing framing for rot, termite damage, and out-of-square conditions before we order anything, because the opening dimensions determine the window sizes and the anchor schedule. On older Fountainebleau homes, it’s common to find water intrusion around leaking windows, and that has to be addressed before the new unit goes in.
Each window is set level, plumb, and square, then anchored per the product’s approval documents. We use AAMA 812 low-expansion foam around the full perimeter of the frame as the air and weather barrier, sealing the gap between the window and the rough opening. The interior and exterior finishes are then applied to match the home. We follow AAMA 2400/2410 installation practice, which covers the methods for installing windows in exterior wall systems, and we work with the permitting requirements of the High-Velocity Hurricane Zone, so your Fountainebleau permit package includes the correct NOA references and product approval submittals.
After every window is in, we run a water test on the installation, clean up the openings and work area, and walk the job with you. If we find anything off, we fix it before we consider the project done. That’s the difference between a crew that hangs windows and a company that installs impact-rated systems to code.
Frequently Asked Questions - Vinyl Impact Windows
Design pressure is matched to your specific wind zone, up to +/-100, never a higher rating than the home requires. Every opening is evaluated individually because elevation, exposure, and location within the structure all affect the DP requirement. Your quote will state the exact design pressure for each window.
Lead time varies by manufacturer and configuration, but most vinyl impact window orders in Fountainebleau run four to eight weeks from approved shop drawings to delivery. Custom sizes and specialty glass can extend that. We’ll confirm the timeline on your quote so you can plan around it.
Yes, in Fountainebleau and throughout the HVHZ, your permit package must reference the Miami-Dade NOA or Florida Product Approval for the exact configurations being installed. We handle this as part of the installation and provide the correct submittal documents for your permit application.
Most openings can be built to custom widths and heights within the manufacturer’s approved size range, and operable styles include single hung, horizontal slider, casement, picture, and special shapes. We verify every custom configuration against its NOA or Florida Product Approval before we order.
Vinyl frames need very little: an occasional wash with mild soap and water is enough to keep them clean. Check the weep holes along the bottom of the frame once or twice a year and clear out any debris so water drains properly. The hardware on operable windows benefits from a light lubricant once a year.
Get a Quote - Vinyl Impact Windows in Fountainebleau
If you’re replacing windows in Fountainebleau, start with a measurement, not a guess. Winslow Windows & Doors will visit your home, measure every opening, evaluate your wind zone, and put together a line-item quote that shows exactly what you’re paying for. Call (727) 620-6983 to schedule your free on-site measurement and project quote.
Written by the team at Winslow Windows & Doors, serving Fountainebleau, FL with hurricane-impact window and door installation.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
