Bay & Bow Windows

Bay & Bow Windows in Fountainebleau, FL | Winslow Windows & Doors

Bay and bow windows bring something few other products can: a room that feels larger, more open, and genuinely connected to the Florida light. For Fountainebleau homeowners, these projecting multi-panel configurations add usable interior shelf or seating space while wrapping the view in laminated impact glass rated for our wind zone. Winslow Windows & Doors has installed these across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, and we fabricate every configuration to the opening rather than forcing a stock unit into place. If you’re considering a bay or bow for a living room, breakfast nook, or bedroom, call (727) 620-6983 to talk through the options.

Call (727) 620-6983

Product Overview - Bay & Bow Windows

A bay window projects outward from the wall plane, typically with three panels: a large fixed center unit flanked by operable or fixed side panels set at angles, commonly 30 or 45 degrees. A bow window uses four, five, or even six narrower panels arranged in a gentle arc, creating a more curved profile that suits both contemporary and traditional facades in Fountainebleau. Both styles deliver panoramic sightlines and capture light from multiple directions throughout the day.

What sets our impact series apart is the glass itself. Each lite carries a PVB polyvinyl butyral interlayer sandwiched between panes, so if debris strikes the window during a storm, the glass fractures but remains bonded to the interlayer rather than blowing into the room. That’s the engineering difference that matters in a hurricane-prone market like ours. The frames are fabricated in aluminum or vinyl, depending on your elevation, exposure, and budget, and every unit is custom built to the rough opening dimensions we measure on site.

Bay and bow windows also create real, usable square footage. The projection depth, typically 12 to 24 inches depending on configuration and structural clearances, becomes a window seat, plant shelf, or display ledge. In Fountainebleau homes where indoor space is at a premium, that additional ledge area is not decorative fluff; it’s functional floor plan gained without moving a single wall.

Technical Specifications

• Frame materials: Aluminum or vinyl, selected per project for exposure, structural load, and aesthetics
• Maximum size: Custom fabricated to the opening; no stock sizing constraints
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, tan
• Sill options: Standard sill or seat/shelf sill for added interior depth
• Design pressure: Matched to your wind zone, up to +/-100; never rated higher than required
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to Florida Building Code High-Velocity Hurricane Zone requirements

Hurricane & Compliance Performance

Laminated Impact Glass
Every bay and bow we install in Fountainebleau carries laminated impact glass with a PVB interlayer. Under impact, the glass cracks but stays adhered to that interlayer, holding the barrier intact and keeping wind, rain, and debris outside where they belong. It performs as an impact shield, not just a window.

Miami-Dade NOA / Florida Product Approval
Each configuration we quote carries a Miami-Dade Notice of Acceptance and Florida Product Approval number issued per specific size, glass, and frame combination. We verify the exact NOA on your project quote, because the number only applies to the tested configuration you’re actually buying. No generic claims, no square pegs in round holes.

FBC / HVHZ Compliance
These units are engineered to Florida Building Code High-Velocity Hurricane Zone requirements, which govern Fountainebleau and most of Miami-Dade County. That means the frame, glass, anchoring, and installation details all work together as a system rated for our wind zone, not a standard window relabeled as coastal.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests simulate what actually happens when a 2×4 or roof tile hits glass at windborne speed, followed by repeated wind gusts trying to push the assembly inward. Our bay and bow windows pass this gauntlet.

Design Pressure for Your Wind Zone
Design pressure is the real number that matters, and it’s dictated by the wind zone where you live in or around Fountainebleau. We match each unit to the required DP rating for your specific elevation and exposure, up to +/-100, and we never over-spec beyond what the structure demands. Correct pressure rating at correct cost: that’s the discipline.

Energy Performance
Low-E and insulated glass options are available on this product line, which matters for afternoon sun exposure on west-facing Fountainebleau elevations. Low-E coatings reduce solar heat gain while keeping visible light, and insulated glazing adds a thermal break that helps interior comfort year-round, not just in storm season.

Color & Glass Options

Finish color carries more weight in Fountainebleau than in most Florida markets. Many homes in this area lean Mediterranean or coastal contemporary: stucco exteriors in warm beige tones, white trim, occasionally darker bronze accents. Our white and almond finishes suit the lighter, classic Florida palette. Bronze and black work well when the home has darker roof lines, bronze hardware, or a more modern elevation. Tan occupies the middle ground, blending with earthy stucco without shouting.

Glass selection depends on what each room actually needs. Clear glass maximizes visible light and works best on shaded or north-facing elevations. Tinted glass cuts glare and heat gain for rooms that get direct exposure, particularly through our long summer afternoons. Low-E insulated glass is the energy option, and laminated impact glass is the foundation under every unit, because in Fountainebleau, storm code is not optional. We’ll walk you through the tradeoffs by room, not by brochure.

Installation by Winslow Windows & Doors in Fountainebleau

We’ve replaced enough windows in Fountainebleau to say this plainly: a NOA-rated bay or bow window installed poorly is no longer NOA-rated. The product approval covers the assembly as tested and installed, not just the glass in a crate. That’s why our installation practice follows AAMA 2400 and 2410 standards, with AAMA 812 low-expansion foam used for the perimeter seal on every opening we set.

Our process starts with a pre-install inspection of the rough opening and surrounding framing. Bay and bow units carry real structural load when they project beyond the wall plane, so we check the header, sill, and support framing before we ever order the unit. On install day, we set every unit level, plumb, and square, shimming as required and anchoring to match the engineering for that configuration’s design pressure. The perimeter is sealed with AAMA 812 foam, then we run a water test on the assembly before trim and finishing. Cleanup happens that day, and if your municipality or HOA requires permit documentation, we provide the NOA and Florida Product Approval submittal for your permit package.

Fountainebleau sits within a high-velocity hurricane zone, and coastal exposure adds wind pressure that the permitting authority will want to see addressed. We know what Miami-Dade and your local jurisdiction require, and we make sure the paperwork matches the product we actually install. That’s the difference between a window that looks good in a photo and one that holds when it counts.

Frequently Asked Questions - Bay & Bow Windows

What wind zone / design pressure is the Bay & Bow Windows rated for?
Design pressure is matched to your specific wind zone, up to +/-100, based on your Fountainebleau address, elevation, and exposure. We never oversell pressure rating beyond what your structure requires, because the right DP is the one that meets code for your exact location. Call (727) 620-6983 and we’ll calculate the requirement for your opening.

What is the lead time for a bay or bow window?
Since every bay and bow is fabricated to the opening, lead time varies by configuration, glass package, and finish selection. We’ll give you a written timeline on your quote, and we coordinate installation scheduling around the fabrication date so you’re not living with an open opening. Call (727) 620-6983 for current lead times on the exact size you need.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, for most Fountainebleau projects. Your permit package will need the NOA and Florida Product Approval number for the specific configuration you’re installing, plus the design pressure calculations. We provide those documents with your quote and installation contract, and we package them for your permit submittal. Call (727) 620-6983 if you need the paperwork for a project you’re already planning.

Can I customize the size or configuration?
Yes. Bay windows are typically three panels, and bow windows can go four, five, or six panels depending on your opening width and projection depth. Glass, finish color, sill style, and operable versus fixed panels are all selectable. We measure the opening, then fabricate to those dimensions, no forcing a stock unit into a space it wasn’t built for. Call (727) 620-6983 to walk through what your wall can support.

How do I maintain the frame and track?
Wipe the frame and sill with mild soap and water a few times a year, and keep the weep holes clear so drainage works as designed. There’s no track on fixed bay or bow panels, but operable side units benefit from cleaning the sill track and checking the weatherstripping annually. In Fountainebleau’s salt-adjacent air, aluminum frames appreciate a freshwater rinse more often than inland homes. We’ll give you a maintenance checklist specific to your configuration at installation.

Get a Quote - Bay & Bow Windows in Fountainebleau

Every bay and bow window we sell is measured, fabricated, and installed for one address: yours. If you’re in Fountainebleau and ready to price a bay or bow window, call (727) 620-6983 to schedule a free on-site measurement. We’ll bring the paperwork, verify your wind zone, and give you a written quote with the exact configuration, glass package, and lead time.

Written by the team at Winslow Windows & Doors, serving Fountainebleau, FL with hurricane-impact windows and doors.