Awning Windows

Awning Windows in Fountainebleau, FL | Winslow Windows & Doors

Awning windows are the top-hinged, crank-out workhorses of Florida architecture, and for good reason. They shed afternoon rain while letting humid air move through the house, which matters in Fountainebleau from June through September. Winslow Windows & Doors supplies and installs impact-rated awning windows in aluminum and vinyl across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We serve homeowners throughout Fountainebleau and surrounding Miami-Dade neighborhoods, and we handle the whole job: measurement, permitting assistance, installation, and final inspection. If you’re pricing out replacement windows or planning new construction, call (727) 620-6983 to schedule a free on-site measurement.

Call (727) 620-6983

Product Overview - Awning Windows

Awning windows hinge at the top and crank outward from the bottom, which gives them a trick no sliding window can match: they stay open during a light rain without letting water inside. That makes them a natural fit for Fountainebleau homes, where afternoon storms roll through with little warning and ventilation matters year-round. The sash presses against the frame when closed, creating a compression seal that air and water have a hard time getting past.

In the impact-rated configuration we sell and install, the glass is laminated with a PVB interlayer. When a wind-borne object hits the glass, the lamination holds the pane together instead of letting it shatter into the room. The frame itself, whether aluminum or vinyl, is engineered to carry that laminated glass without flexing, which is the part of the equation people forget. A heavy impact sash needs a frame rigid enough to keep the seal weathertight under load.

We see awning windows specified in a few recurring spots in Fountainebleau: above kitchen sinks where reach is awkward, in bathrooms where privacy and ventilation both matter, and stacked high on walls where a side-hinged casement would be cumbersome. They also work well as a small accent window paired with larger fixed or picture windows, adding airflow without breaking up the sightline.

Winslow Windows & Doors installs these systems with the same discipline we bring to every hurricane-impact project in Fountainebleau: level, plumb, square, and sealed with AAMA 812 low-expansion foam around the perimeter. The window is only as good as the opening it sits in, and we treat the rough opening preparation as carefully as the window itself.

Technical Specifications

The awning window configurations we order for Fountainebleau projects start with these material and glass choices. Your exact build gets locked in at the quote stage, and every number below can be verified on your final proposal.

• Frame materials: Aluminum or vinyl. Aluminum suits larger sashes and modern sightlines; vinyl offers thermal performance and a lower maintenance profile.
• Glass options: Laminated impact glass with PVB interlayer (the hurricane-rated core), plus Low-E insulated glass, tinted glass, and clear glass depending on your energy and light priorities.
• Finish options: White, almond, bronze, black, and tan.
• Screen options: Fixed screen or retractable screen, chosen by how often you plan to open the window and how clean you want the sightline when it’s closed.
• Operation: Crank-out hardware with a top hinge; multi-point locking available on select lines.
• Size range: Custom widths and heights to fit your rough openings; large horizontal configurations are common above doors and wide sills.

Hurricane & Compliance Performance

Awning windows sold for Fountainebleau homes sit in one of the strictest product-approval environments in the country. Here is what the impact-rated configuration actually delivers, in plain terms.

Laminated Impact Glass - The glass uses a PVB (polyvinyl butyral) interlayer sandwiched between panes. Under impact, the glass may crack but the lamination holds the pieces in the frame, keeping wind, rain, and debris outside where they belong. This is the heart of the system.

Miami-Dade NOA / Florida Product Approval - Each configuration we order carries Notice of Acceptance and Florida Product Approval documentation issued per product. We provide the approval numbers on your quote so your permit application in Fountainebleau goes through without a fight.

FBC / HVHZ Compliance - The awning window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That means the product is built for the wind zones that govern construction here in Miami-Dade County, not a generic coastal standard from another state.

TAS Testing Context - HVHZ-rated products like this one are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These are the tests that matter in Fountainebleau.

Design Pressure Matched to Your Wind Zone - Design pressures are matched to your specific wind zone, up to +/-100, and never higher than your site requires. We do not upcharge for a higher rating you don’t need, and we don’t under-spec a window that sits on an exposed elevation.

Energy Performance Options - Low-E and insulated glass options are available where energy performance matters. A west-facing awning window in Fountainebleau gets hammered by afternoon sun, and Low-E keeps that heat gain manageable without changing the look of the window.

Color & Glass Options

Fountainebleau has a distinct architectural mix: mid-century moderns, Mediterranean villas, and newer contemporary builds. The finish you choose should sit naturally in that context. White and almond read classic on stucco and work on nearly every home. Bronze and black suit modern and updated exteriors, especially paired with darker trim or metal roof accents. Tan is the quiet option that disappears against warm beige and sand tones common across Miami-Dade.

Glass selection is less about looks and more about what each side of your house deals with. Clear laminated impact glass keeps views bright and unobstructed, which matters if you’re looking out at a pool or landscaped yard. Tinted glass cuts glare and heat gain on east and west elevations. Low-E insulated glass adds a thermal break and helps your air conditioning keep up in August. Many Fountainebleau homeowners mix glass types per elevation: clear on the north, tinted or Low-E on the south and west. We’ll walk through that during your estimate.

Installation by Winslow Windows & Doors in Fountainebleau

An HVHZ-rated awning window is a system, and the rough opening is part of that system. If the install is sloppy, the NOA pedigree doesn’t matter. Water gets in around the frame, the seal fails early, and the window underperforms. That is why we install every Fountainebleau project the same way, whether it’s one bathroom window or a whole-house replacement.

We start with a pre-install inspection of the rough opening: stud condition, sill slope, existing flashing, and any water damage from the old window. Then the new frame goes in level, plumb, and square, shimmed exactly where the manufacturer requires it. We follow AAMA 2400/2410 installation practice, which sets the standard for flashing, anchoring, and drainage in high-wind environments. The perimeter gets AAMA 812 low-expansion foam sealant, which fills gaps without warping the frame and creates a continuous air and water barrier.

Every opening is water-tested after install. We also clean the glass, haul off the old windows and debris, and leave the work area the way we found it. Permitting in Fountainebleau falls under Miami-Dade HVHZ jurisdiction, and we help you navigate the product approval submittals and inspection requirements so the paperwork matches the windows.

Coastal wind zones and afternoon storm exposure in Fountainebleau mean the margin for installation error is thin. We build our process around that reality.

Frequently Asked Questions - Awning Windows

What wind zone or design pressure are awning windows rated for?
The design pressure is matched to your specific wind zone in Fountainebleau, up to +/-100, and never higher than your site requires. We confirm the exact DP rating on your quote after we review your elevation and opening sizes.

What is the lead time for awning windows?
Lead time depends on the manufacturer, frame material, glass package, and finish you select. After we finalize your order, we’ll give you a firm production timeline and an install date before any work starts. Call (727) 620-6983 and we’ll scope your project.

Does my Fountainebleau permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, in virtually every HVHZ jurisdiction in Miami-Dade County, your permit package needs the product approval documentation for the exact window configurations being installed. We supply the NOA and Florida Product Approval numbers for your specific order so the submittal is accurate. Estimates are free.

Can I customize the size or configuration of my awning windows?
Yes. Awning windows are ordered to your rough opening dimensions, not pulled from stock. You choose the width, height, frame material, finish, glass package, and screen option. We’ll measure every opening in Fountainebleau during your estimate and quote exact sizes.

How do I maintain the frame and hardware?
Clean the frame with mild soap and water, and keep the bottom track and weep holes clear of debris so water drains the way it’s designed to. Lubricate the crank mechanism once a year with a light silicone lubricant. If you notice stiff operation or a torn screen, call us before small issues become leaks. We’re at (727) 620-6983.

Get a Quote - Awning Windows in Fountainebleau

If you’re replacing windows in Fountainebleau or building new, start with a free on-site measurement. We’ll review your openings, talk through glass and finish options, and give you a written line-item quote with no games. Call (727) 620-6983 today and let’s get your project on the schedule.

Written by the team at Winslow Windows & Doors, serving Fountainebleau, FL since day one.