Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Fountainebleau: What to Know First
Therma-Tru roof repair in Fountainebleau typically runs $350-$1,200 depending on whether we’re dealing with flashing around a door frame, a leaking skylight collar, or water damage that’s crept under the roofline. Most Therma-Tru problems we see aren’t the door or window itself failing - they’re the place where roofing meets the frame. We’re an independent Therma-Tru service provider, not a factory-authorized shop, which means we fix what’s actually wrong instead of selling you a replacement you don’t need. If you’re a Fountainebleau homeowner with water staining near a Therma-Tru door or window, call us at (727) 620-6983 and we’ll tell you straight what it’ll take.
How Therma-Tru Products Fail - and How We Fix Them
After more than a decade working on homes around Fountainebleau, we’ve seen the same Therma-Tru failure patterns repeat themselves. Here’s what actually goes wrong:
- Classic-Craft and Fiber-Classic frame rot at the sill. These are Therma-Tru’s fiberglass-skinned door lines, and the finish holds up beautifully - but the wood sub-frame underneath doesn’t. In Fountainebleau’s wet season, water wicks up from poorly flashed thresholds and sits against the sub-sill for months. By the time you see peeling paint at the bottom of the door, the wood behind it is spongy. We pull the door, replace the rotted sub-frame, and rebuild the flashing so water sheds away from the opening instead of into it.
- Smooth-Star and Pulse series - failed corner seals at the frame joint. These mid-range lines use compression-fitted corner gaskets that shrink after years of South Florida heat. The symptom looks like a roof leak: water staining on the ceiling near an exterior door. The real cause is often the door frame corner letting rainwater run down inside the jamb. Two of the last three Smooth-Star calls in Fountainebleau came in as “roof repair” but were actually frame-corner failures we fixed in under two hours.
- Benchmark by Therma-Tru - deteriorated threshold cap and sub-sill. The Benchmark line is Therma-Tru’s premium patio door, and the aluminum threshold cap can lift at the ends after enough thermal cycling. Rain hitting the door at an angle gets under the cap and rots the sub-sill. We replace the cap, bed it in sealant, and double-check the drip edge above the door so water never reaches the threshold in the first place.
- Flashing failures above Therma-Tru transoms and sidelites. Almost every Therma-Tru entry system with a transom we’ve repaired in Fountainebleau had one thing in common: the original installer taped the top nailing fin but never installed a proper head flashing tucked under the house wrap. Water gets behind the siding, runs down the wall, and presents as a roof leak at the ceiling - sometimes ten feet from the actual entry point. We cut a reglet, install a proper metal head flashing, and reseal the transition where roofing underlayment meets the door assembly.
- Therma-Tru door-to-roof transitions on covered patios and porch entries. Where a flat roof or porch roof meets a Therma-Tru door, the weak point is almost always the termination bar and sealant joint. Florida’s UV eats standard sealant in about 4-5 years. We see cracked, brittle sealant on nearly every Fountainebleau porch door over three years old. We replace it with a polyether-based sealant rated for continuous water immersion, which is what this climate actually calls for.
Our Therma-Tru Roof Repair Process
Here’s what happens when you call Winslow for Therma-Tru roof repair in Fountainebleau:
- 1
You call (727) 620-6983. A live person answers - day, night, weekends. No voicemail loop, no call center. You tell us what you’re seeing.
- 2
We inspect the full water path, not just the stain. Most roof repairs around doors and windows are misdiagnosed because someone looked at the ceiling and stopped there. On a Therma-Tru job, we check the roof termination above the opening, the head flashing, the frame corners, the sill, and the threshold - because water moves, and the stain rarely sits above the leak.
- 3
We lay out parts options honestly. Some jobs need genuine Therma-Tru parts to keep a warranty intact - threshold caps, sill pans, specific weatherstripping. Other jobs don’t, and a quality aftermarket flashing or sealant does the job for less. We’ll tell you which is which and why, with a written line-item quote before any work starts.
- 4
We repair, replace, and seal in the right order. Flashing first, frame work second, finish work last. Roofing transitions get tucked, not caulked over. Everything gets cured and tested.
- 5
We water-test before we leave. Garden hose on the transitions, twenty minutes, watching for any wicking or seepage at the interior. If it leaks, we’re not done.
- 6
You get the Warranty Confirmation. All of it backed by the Done Right Promise. If it’s not done right, Ed Winslow makes it right. Period.
What Therma-Tru Roof Repair Costs in Fountainebleau
Straight numbers, because you deserve them before the truck rolls:
- Sealant replacement at a Therma-Tru frame-to-roof transition: $180-$350
- Corner seal or frame gasket repair on a Smooth-Star or Pulse door: $250-$500
- Head flashing install or replacement above a Therma-Tru door or transom: $400-$750
- Threshold cap and sub-sill replacement (Benchmark or Classic-Craft): $550-$950
- Full frame rebuild with sill pan and re-flashing after rot found: $900-$1,200+
What moves the price: how far the water traveled, whether framing lumber needs replacement, and whether the existing flashing is salvageable. Every repair over $200 gets $40 off. Seniors and veterans get 10% off, every job, forever. Call (727) 620-6983 and we’ll give you an exact number before work starts - free estimate, no surprises on the invoice.
Why Fountainebleau Homeowners Call Winslow Windows & Doors for Therma-Tru Work
Ed Winslow grew up in Fountainebleau, a few blocks from Tamiami Park, and he still lives in the same zip code he was raised in. The homes we work on are our neighbors’ homes. When Ed puts his name on a Therma-Tru roof repair, he answers for it - the Done Right Promise is a lasting standard, not a slogan. Our techs are background-checked, uniformed, and trained on Therma-Tru-specific failure modes. And because Winslow is an authorized installer for PGT, CGI, CWS, and ES Windows too, we understand how your Therma-Tru door or window fits into your whole exterior envelope - not just the one flashing detail in front of us. A live person answers every call, 24/7. Upfront pricing. No surprises. That’s how we’ve operated since 2011, and it’s why homeowners around Fountainebleau keep our number in their phones.
FAQs
In most cases, no - Therma-Tru’s warranty covers manufacturing defects in the door slab and fiberglass skin, and a roof repair or flashing correction around the opening doesn’t void that. What can void it is improper part substitution or a repair that fails and causes secondary damage. That’s why we use genuine Therma-Tru parts where the warranty depends on them, and quality aftermarket parts where it doesn’t. Call (727) 620-6983 if you’re uncertain about your specific door’s coverage.
Common parts like threshold caps and weatherstripping are typically available within 3-5 business days through our supply channels. Less common parts - a specific Benchmark patio door sill pan or a Pulse corner gasket set - can take 1-2 weeks. If the repair is urgent, we’ll propose a temporary water-tight seal at no labor charge until the right part arrives.
Repair is the right call when the slab and fiberglass skin are sound and the damage is in the frame, threshold, or flashing - which covers the majority of Fountainebleau cases we see. Replacement makes sense when the thermal break has failed, the sill pan is completely rotted through into your flooring substrate, or you’re pouring money into the same door every other year. We’ll tell you which one you’re in, with numbers for both.
Most flashing, sealant, and frame repairs fall under maintenance and don’t require a permit in Miami-Dade County. If the damage is extensive enough to require structural repair to the rough opening or surrounding roof framing, we pull the permit, schedule the inspection, and pass it before we hand you the final invoice. Call (727) 620-6983 and describe what you’re seeing - we’ll tell you right away whether your job needs permitting.
A correctly installed flashing and sealant system on a Therma-Tru door in Fountainebleau should last 12-15 years with the right materials - and that’s the failure-free period, not the warranty period. If it fails sooner, the Done Right Promise applies and we come back. Ed’s name is on the door - literally. That means he answers for every job we do.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fountainebleau and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.