Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Roof Repair in Fountainebleau: What to Know First
We repair Mr-Glass roofing systems throughout Fountainebleau, and most jobs are done within one to three days of diagnosis. Pricing is straightforward: minor flashing or seal work typically runs $250-$650, while structural repairs involving decking or underlayment start around $900. This page is for homeowners in Fountainebleau who own a Mr-Glass roof and want a straight answer on what’s wrong, what it costs, and whether it’s worth fixing. Call (727) 620-6983 any hour and a real person answers.
As an independent Mr-Glass service provider, we don’t have a corporate script to follow. We just fix roofs the way Ed Winslow has done it since 2011: diagnose the actual problem, quote the actual price, and stand behind the work with the Done Right Promise.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass roofing systems are known for their glass-fiber reinforced shingles and underlayments, but they develop specific failure patterns in Fountainebleau’s heat and storm cycles. Here’s what we see most often and how we handle it.
- Glass-fiber mat delamination on Mr-Glass Signature shingles. In Fountainebleau, where afternoon sun bakes roofs well past 140 degrees in July, the adhesive layer between the fiberglass mat and asphalt can cure out prematurely. You’ll see shingles that look wavy or feel soft underfoot. We replace the delaminated sections with matching or better materials, re-nailing per manufacturer spacing, and seal the edges with a polyurethane flashing sealant that holds up to Florida heat better than the factory tar strip.
- Flashing failures at the headwall and sidewall junctions. This is the most common leak point on Mr-Glass tile-profile installations in Fountainebleau. The factory step flashing is thin-gauge aluminum, and after a decade of thermal expansion and contraction it can split at the fold lines. The fix is new galvanized or lead-coated copper step flashing, not silicone. We’ve opened more than a few Fountainebleau roofs where a previous contractor buried gaps in sealant instead of replacing the metal.
- Underlayment degradation under Mr-Glass tile systems. The original synthetic underlayment specified for Mr-Glass tile roofs can break down faster than expected in Fountainebleau’s humidity, especially on low-pitch sections where water doesn’t drain quickly. The telltale is a leak on an interior wall far from any obvious tile damage. We lift the tiles, replace the underlayment section with a self-adhered high-temp membrane, and re-set the tiles with replacement battens.
- Ridge cap blow-offs during hurricane season. Fountainebleau gets hit hard by feeder bands, and Mr-Glass ridge caps installed with standard short nails don’t always survive a direct gust. We re-secure caps using the same wind-load nailing pattern required for impact-rated applications in Miami-Dade, then seal the nail heads. If a cap is cracked or missing the fiberglass weave, we replace it rather than patch it.
- Valley seal cracks on Mr-Glass low-slope installations. The factory valley metal on some Mr-Glass lines is aluminum, which expands and contracts at a different rate than the shingles around it. After enough Fountainebleau summers, the factory seal strips crack and pull away. We pull the valley shingles, install a wider-width galvanized valley liner where the roof allows it, and re-lay the shingles with a proper overlap so water stays where it belongs.
Our Mr-Glass Roof Repair Process
- 1
Call and talk to a person. You call (727) 620-6983. No voicemail, no call center. We ask where you’re seeing the problem and schedule a visit.
- 2
On-roof diagnosis. A uniformed, background-checked tech walks the roof, checks for the specific Mr-Glass failure patterns above, and takes photos of what’s actually failing. No generic “looks old” answers.
- 3
Straightforward quote. We tell you what’s wrong, what it costs to fix, and whether repair or replacement makes more financial sense. You get a written line-item number before any work starts.
- 4
Parts decision. If Mr-Glass materials are still available, we use them where it matters for warranty and appearance. If they’re discontinued or on backorder, we tell you and recommend a proven aftermarket match that meets or exceeds the original spec. No hidden substitutions.
- 5
The repair. We fix it properly, per manufacturer installation guidelines and Florida wind-load requirements. Whether it’s flashing, underlayment, or shingle replacement, it’s done the way it should have been done the first time.
- 6
Inspection and cleanup. We test the repair with a water check where practical, walk you through what we did, and leave the roof and yard clean. The Done Right Promise means if it’s not right, we come back. Period.
What Mr-Glass Roof Repair Costs in Fountainebleau
Costs in Fountainebleau track the local market, which means you’re paying for skilled labor that understands Miami-Dade wind rules and Florida heat. Here are honest ranges for common repairs:
- Minor flashing replacement at one penetration or wall junction: $250-$600
- Delaminated shingle section repair (up to 100 sq ft): $650-$1,200
- Underlayment section replacement under Mr-Glass tile: $900-$1,800
- Ridge cap re-securing or partial replacement: $400-$900
- Valley repair with new liner and shingle re-lay: $800-$1,600
What moves the price: roof pitch and accessibility (a two-story Fountainebleau home with a steep tile profile costs more to work on than a single-story ranch), the extent of hidden decking damage, and whether Mr-Glass factory materials are still in stock. Every quote is line-item. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (727) 620-6983 for a free estimate.
Why Fountainebleau Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Ed Winslow grew up a few blocks from Tamiami Park, and he still lives in the same zip code. The Fountainebleau roofs we repair are on our neighbors’ homes, not some job ticket from a national chain. When you call, you get a live person at 2 a.m. if that’s when the leak shows up. When we send a tech, you know exactly who’s in the truck before it pulls up.
We’ve been an authorized installer for Mr-Glass alongside PGT, CGI, CWS, and ES Windows for years. That means our techs work across the brands and know how systems interact when roof repairs butt up against windows and doors. And every job, including every Mr-Glass repair, is covered by the Done Right Promise. Ed’s name is on the door and on every job we do.
FAQs
No, independent repairs by a licensed contractor don’t void your Mr-Glass warranty, provided the repair works with the system rather than against it. We install Mr-Glass materials where they’re still available and use manufacturer-spec nailing and sealing practices, so your warranty stays intact.
It depends on the age of your roof and the specific Mr-Glass line. Some discontinued profiles are no longer in production, and sourcing them has gotten harder even for authorized dealers. If we can’t get factory pieces, we’ll tell you straight and recommend an aftermarket match that performs as well or better, then show you both options before we touch anything.
We answer the phone around the clock and can typically get a tech out within a day or two for non-emergency repairs. If you’ve got active water intrusion, call (727) 620-6983 right away and we’ll prioritize getting the roof stabilized.
Repair makes sense when the failure is isolated: a flashing junction, a short ridge cap run, a small delaminated section. Replacement starts to make more financial sense when you’re looking at widespread granule loss, multiple leaks across different roof planes, or decking rot. We’re going to tell you the hard truth either way, because the cheaper wrong answer is still the wrong answer. Call for a free estimate and we’ll give you our honest take.
It won’t, unless we find hidden damage that changes the scope, and if that happens we stop and show you what we found before any additional work begins. That’s the no-surprises promise we’ve kept since 2011.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fountainebleau and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After