Mr-Glass Impact Windows Nationwide | Winslow Windows & Doors

Mr-Glass Impact Windows in Fountainebleau: What to Know First

Mr-Glass impact windows in Fountainebleau are something we service, repair, and replace as an independent Mr-Glass service provider. Most Mr-Glass jobs we handle in Fountainebleau wrap up within one to three days depending on whether we’re repairing hardware, reglazing a unit, or doing a full-frame replacement. We give you a written line-item quote before any work starts, so you know the price before we touch the first screw. If you own Mr-Glass windows and something’s not right, call us at (727) 620-6983 and we’ll walk you through what we’re seeing when we get there.

Call (727) 620-6983

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass makes a solid impact window, but every product line has its weak points. Here’s what we see on Mr-Glass units around Fountainebleau homes, and how we address it.

• Interlayer clouding on Mr-Glass Laminated Impact units. The laminated glass interlayer can start to haze or cloud after years of direct Fountainebleau sun exposure. We see it most often on west-facing elevations where afternoon heat is relentless. The fix is a reglaze with a matching laminated impact unit. We don’t try to polish it out because the interlayer is sandwiched inside the glass; no amount of surface cleaning restores clarity.
• Roller and track wear on Mr-Glass Horizontal Slider impact windows. The sliding panels on older Mr-Glass sliders ride on nylon rollers that flatten over time, especially when tracks collect sand and grit from wind off the Everglades. Homeowners notice the panel dragging or sticking halfway open. We replace the rollers and realign the track. On Mr-Glass sliders with aluminum tracks, we check for corrosion pitting near the weep holes, which accelerates wear if left alone.
• Weep hole blockage on Mr-Glass Single Hung impact windows. Mr-Glass single hungs have weep holes at the bottom frame that drain water that gets past the outer seal. When those holes plug with pollen, dust, or the fine dirt that blows through Fountainebleau, water sits in the track and eventually eats at the frame coating. We clean the weep system and, when needed, ream the holes slightly and install small weep covers that keep debris out without slowing drainage.
• Seal failure on Mr-Glass Fixed Picture impact windows. Picture windows are workhorses, but the insulating glass unit can lose its seal and fog up between the panes. With impact-rated fixed windows, that fog is more than cosmetic; it means the gas fill is gone and the unit’s insulation value has dropped. We order a replacement IGU matched to the Mr-Glass frame dimensions and swap it in. On units still under warranty, we coordinate the claim so you don’t pay for covered parts.
• Hardware loosening on Mr-Glass Casement and Awning impact windows. The crank mechanisms and multi-point locking hardware on Mr-Glass casements can work themselves loose after years of use, leaving a window that doesn’t seal tightly against the gasket. In Fountainebleau, a loose casement isn’t just drafty; it compromises the impact rating because the frame flexes under wind load. We tighten, adjust, and replace the crank gear or lock points as needed, then test the seal with a smoke pen so you can see it closes tight.

Our Mr-Glass Impact Windows Process

Here’s how a Mr-Glass job goes from your first call to the final walkthrough.

1. 1
   You call us at (727) 620-6983. A live person answers, 24/7. We ask what you’re seeing and schedule a time that works for you. No trip charge inside the home county.
2. 2
   We inspect the window and diagnose the failure. We look at the frame, the glass, the hardware, and the installation. We tell you exactly what we found in plain language.
3. 3
   We decide on OEM or quality aftermarket parts together. For warranty-covered pieces we recommend OEM. When the warranty is expired and an aftermarket part performs as well or better, we show you both options and the price difference before you decide.
4. 4
   We do the work. Our technician arrives in uniform, background-checked, and keeps the work area covered and clean. Repairs, reglazes, and replacements happen on schedule.
5. 5
   We test, not just eyeball. Every Mr-Glass window gets a full functional check: open, close, lock, drain, and seal. On impact units we verify the laminated glass and frame are seated correctly.
6. 6
   We walk you through everything we did and hand you the bill. The price matches the quote. If something’s not right, the Done Right Promise means we come back and make it right.

What Mr-Glass Impact Windows Costs in Fountainebleau

Mr-Glass impact window pricing in Fountainebleau depends on what’s wrong and what the window is. Here are the ranges we typically see:

• Hardware repair (rollers, cranks, locks): $120-$280 per window
• Weep hole cleaning and drain correction: $90-$180 per window
• Seal repair or IGU replacement on a fixed Mr-Glass picture window: $400-$850 per unit
• Full-frame Mr-Glass impact window replacement: $1,100-$2,600 per window depending on size, frame material, and whether it’s single hung, slider, or casement

What moves the price is the window size, the frame material, whether we’re repairing or replacing, and whether the glass is a standard laminated impact unit or something custom like a geometric shape. Fountainebleau homes run a mix of 1980s and 1990s construction and newer builds, so the opening size drives more cost than most homeowners expect. Call (727) 620-6983 for an exact quote. Estimates are free.

Why Fountainebleau Homeowners Call Winslow Windows & Doors for Mr-Glass Work

We’ve been doing this since 2011, and Ed Winslow grew up right here in Fountainebleau, a few blocks from Tamiami Park. He still lives in the same zip code he was raised in. That means the Mr-Glass windows we fix are attached to homes we drive past every week. When you call, a live person answers, 24/7. Our techs know Mr-Glass products well, and because we’re authorized installers for PGT, CGI, CWS, and ES Windows too, we can tell you honestly when a Mr-Glass repair makes sense and when a replacement from a different brand would serve you better. Every job is backed by the Done Right Promise. Ed’s name is on the door, and on every job we do.

FAQs