ES Windows Custom & Geometric Windows Nationwide | Winslow Windows & Doors

ES Windows Custom & Geometric Windows in Fountainebleau: What to Know First

We provide independent ES Windows custom and geometric window service in Fountainebleau, typically completing most custom & geometric jobs within 5 to 10 business days once we’ve measured and ordered. Pricing runs honest and upfront: expect $1,200 to $4,800 for most Fountainebleau custom geometric window work, depending on size, shape complexity, and whether we’re repairing or replacing. If you own an ES Windows product with a curved arch, radius corner, pentagon, or oversized opening, this page will save you from guessing. Call (727) 620-6983 and a live person answers, day or night.

Call (727) 620-6983

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid product, but even quality brands have weak points, especially in South Florida’s humidity, salt air, and afternoon downpours. Here’s what we see in Fountainebleau homes:

• Geometric frame corner separation on ES Windows’ Series 7090 and 7900 lines. Radius and arched frames carry stress at the miter joints, and in Fountainebleau’s wet-dry cycles the adhesive can break down in seven to nine years. We re-miter, re-bed with marine-grade sealant, and reinforce the joint with internal corner keys. Without that corner key, the frame will shift again within two seasons.
• Roller drag on heavy arched sashes. The 7900 series sash trolleys are adequate for standard rectangles, but a wide radius top or oversized transom puts lateral load on the rollers that the factory setup doesn’t fully account for. Homeowners notice one side of the arch starting to bind. We replace the trolleys and adjust the track shims so the sash glides without dragging on the weatherstripping.
• Condensation and crusted weep holes on uncommon shapes. Geometric windows with sharp angles, like triangles or trapezoids, have weep channels that clog faster than rectangular units. In Fountainebleau, the combination of heavy rain and landscaping irrigation mist means those weep holes fill with algae and fine sediment. We clear the channels and, where the factory design allows, slightly enlarge the drain path so water exits instead of pooling inside the frame.
• Seal failure around custom impact glass pockets. ES Windows impact units use a dual-seal spacer system. When the outer glazing bead is not seated perfectly during original installation (we see this on builder-grade Fountainebleau installs from the 2010s), humidity creeps in and fogs the glass. We deglaze, inspect the spacer and desiccant, and re-glaze with fresh structural sealant that meets the original spec.
• Lock misalignment on angled and curved frames. Multi-point locks on ES Windows geometric frames shift over time as the house settles and the frame flexes under wind load. The lock points no longer line up with the keepers, so the window won’t latch cleanly. We realign the hardware bed, adjust the keepers, and test the lock under pressure. A window that doesn’t lock is a security opening, not just an annoyance.

Each one of these is fixable. The trick is knowing what to look for before you order parts, because ordering the wrong component on a geometric window wastes two weeks and your money.

Our ES Windows Custom & Geometric Windows Process

1. 1
   You call, a person answers. We ask about your window’s shape, age, and what you’re seeing or hearing. If it’s a custom geometric opening, we ask for rough dimensions over the phone so we arrive with the right tools and likely parts on the truck.
2. 2
   We diagnose on site. Ed or one of our background-checked, uniformed techs inspects the frame, glass, hardware, and the original installation. We look for the failure point, not just the symptom, because a fogged radius window has a different fix than a cracked one.
3. 3
   The parts decision. We tell you straight whether OEM ES Windows components are the right call or whether a quality aftermarket part does the job without sacrificing the warranty position. We don’t just default to whatever is cheapest, and we don’t upsell OEM when a proven equivalent exists.
4. 4
   Written line-item quote. You get the number before we touch anything. No change orders, no surprises on the invoice. If you have another written estimate, we’ll give you a free second opinion on it.
5. 5
   The repair or replacement. We complete the work, test the window under operation and (when relevant) water, and walk you through what we did. If it’s impact-rated glass, we confirm the unit is seated and sealed to withstand the next storm.
6. 6
   Cleanup and the Done Right Promise. We leave the work area cleaner than we found it. And if it’s not done right, we come back. That’s the Done Right Promise, and it applies to every ES Windows job we do in Fountainebleau.

What ES Windows Custom & Geometric Windows Costs in Fountainebleau

Here’s what we typically quote for ES Windows custom and geometric work in Fountainebleau. These are honest ranges, not teaser rates:

• Arched or radius transom reglaze (fogged glass): $480 to $950 per unit, depending on size and whether the sash needs deglazing or full replacement.
• Geometric frame corner repair (miter separation on a triangle, trapezoid, or pentagon): $320 to $680 per window, including re-bedding and corner reinforcement.
• Custom impact glass replacement (non-rectangular shapes): $900 to $2,800 per window, driven by shape complexity and glass thickness. A simple radius is far cheaper than a triple-angle trapezoid.
• Full custom geometric window replacement (new frame, new glass, new install): $1,800 to $4,800 per opening, with oversized arches and specialty coatings at the higher end.

What moves the price? Shape complexity, glass type (impact-rated vs standard), the condition of the surrounding frame, and whether we can reuse existing hardware. If the opening requires new framing because the original builder cut corners, that adds labor. Call (727) 620-6983 and we’ll come out, measure, and give you a written quote. The estimate is free.

Why Fountainebleau Homeowners Call Winslow Windows & Doors for ES Windows Work

Ed Winslow grew up a few blocks from Tamiami Park, and he still lives in the same Fountainebleau zip code he was raised in. When he puts his name on a truck and sends a technician to your home, he’s sending someone to his neighbor’s house. That changes how we work. We don’t hand you a ticket number. We answer the phone with a live person, 24/7, and the owner of the company is the one who ultimately answers for the job. We’re an authorized installer for PGT, CGI, CWS, ECO Window Systems, and Therma-Tru, so if your ES Windows custom geometric work turns out to be a full replacement situation, we can show you every legitimate option, not just the one brand that pays us the biggest margin. The Done Right Promise means if it’s not right, we make it right. And the published address and license number are right there for anyone to check. Ed’s name is on the door - literally. That means he answers for every job we do.

FAQs