Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Door Installation in Fountainebleau: What to Know First
ECO Window Systems door installation in Fountainebleau typically runs $1,800 to $4,600 for a standard entry door replacement, with most jobs completed in one to two days once your door arrives. We’re an independent ECO Window Systems service provider, not a factory store, which means we quote honest local Fountainebleau labor rates without the manufacturer-mandated markup. This page is for homeowners in Fountainebleau who already own or are considering ECO Window Systems doors and want straight answers about installation, failure points, and what the work actually costs. Call (727) 620-6983 and a real person answers, day or night.
How ECO Window Systems Products Fail - and How We Fix Them
- Threshold seal degradation on the EcoView 7000 series. In Fountainebleau, the combination of summer humidity and torrential afternoon rain wears down the rubber threshold gasket on EcoView 7000 entry doors faster than the manufacturer’s published lifespan. Water starts wicking under the door at the corners, darkening the interior flooring. We pull the door, replace the gasket with a heavier aftermarket EPDM seal rated for constant moisture, and re-set the threshold with a proper slope so water sheds outward instead of pooling.
- Sagging butt hinges on the EcoShield French door line. Fountainebleau homes with settling slabs put uneven pressure on double-door configurations. The EcoShield’s factory hinges are solid brass but undersized for a two-panel swing, and after five to seven years the top hinge on the active slab starts to droop, leaving a visible light gap at the header. We re-mortise and install larger load-bearing hinges, relocate the hinge-side jamb if needed, and re-align both slabs so the astragal seals clean.
- Roller track wear on EcoSlide patio doors. Coral dust and fine sand from Fountainebleau’s limestone soil work their way into the bottom track of EcoSlide sliders, wearing flat spots onto the nylon rollers. The door then rides rough and eventually binds. We flush the track, replace the rollers with stainless-steel racing versions, and adjust the alignment screws. It’s a $200 to $400 fix versus the $1,100-plus a full door replacement would cost.
- Warped fiberglass stiles on the EcoTuff storm door series. Direct western exposure on Flagler Street-adjacent homes bakes the dark-painted EcoTuff storm doors. The fiberglass stiles bow inward over three or four summers, breaking the magnetic weatherstrip contact. We often recommend swapping to a lighter paint color, then re-hanging with reinforced corner brackets that hold the frame square even through thermal expansion cycles.
- Broken multi-point lock rods inside EcoGuard entry doors. The EcoGuard’s three-point locking system uses thin steel rods that run through the door edge. When the door is repeatedly slammed, the rods can bend inside the edge channel and the thumb-turn locks up. Homeowners call us panicked thinking the door is junk. It’s usually a 45-minute fix: we pull the rod assembly, straighten or replace the rods, and re-index the lock points so they throw dead-square into the keepers.
Our ECO Window Systems Door Installation Process
Here’s how a typical job goes, from your first call to the final walkthrough:
- 1
Call and schedule. You call (727) 620-6983, a person picks up, we ask about your door and schedule a time that works. No automated menu.
- 2
On-site assessment. We measure the rough opening, check the slab, the jamb, and the threshold. For ECO Window Systems doors specifically, we inspect the hinge-side reveals and the lock throw because those are where we see the most Fountainebleau-specific issues.
- 3
Upfront quote. We write a line-item price before any work begins. Fixed pricing, no change orders. If you’re replacing an existing door, we match ECO Window Systems spec sheets so the new door seats correctly.
- 4
The install. Uniformed, background-checked techs handle the full job: old door out, new door set, shims, insulation, flashing, and exterior trim. We use flood-rated flashing tape on exterior openings because Fountainebleau gets real wind-driven rain.
- 5
Testing and adjustment. We throw the lock multiple times, check the sweep and weatherstrip contact, and run a water test on the threshold. If it doesn’t seal perfectly, we adjust before we leave.
- 6
Cleanup and walkthrough. We haul the old door, sweep the work area, and walk the finished install with you. Every ECO Window Systems door installation carries the Done Right Promise: if it’s not done right, we come back and make it right.
What ECO Window Systems Door Installation Costs in Fountainebleau
Entry door installation for ECO Window Systems products in Fountainebleau breaks down like this:
- Simple slab replacement (existing frame is square and solid): $1,800 to $2,600
- Full entry door tear-out and new pre-hung unit (EcoView or EcoGuard series): $2,400 to $3,900
- French or double door installation (EcoShield line): $3,200 to $4,600
- Storm door mounting only (EcoTuff series over an existing entry door): $450 to $850
- EcoSlide patio door replacement: $2,800 to $4,200 depending on glass package
What moves the price: whether the existing rough opening needs reframing, if you’re adding impact-rated glass (a requirement for many Fountainebleau homes under current Florida Building Code), and whether the door is a standard size or a custom width. We’ll give you the exact number before we start. Call (727) 620-6983 for a free estimate.
Why Fountainebleau Homeowners Call Winslow Windows & Doors for ECO Window Systems Work
Ed Winslow grew up in Fountainebleau, a few blocks from Tamiami Park, and he still lives in the same zip code. When Ed started Winslow Windows & Doors in 2011, he did it after watching a contractor botch his parents’ storm damage repair and vanish. So the standard here is personal. Every ECO Window Systems door installation is backed by the Done Right Promise: if it’s not done right, we make it right. We also install PGT, CGI, CWS, and ES Windows, so if an ECO Window Systems door isn’t the right call for your opening, we’ll tell you what is instead of forcing a sale. Calls are answered by a live person 24/7. Techs are background-checked and uniformed. And Ed’s name is on the door, literally. That means he answers for every job we do.
FAQs
Yes. We install ECO Window Systems doors purchased from any dealer or big-box store. We’ll inspect the door on arrival, note any transit damage, and install it to manufacturer spec so your warranty stays valid. Call (727) 620-6983 and tell us what you have.
No, as long as the installation follows ECO Window Systems’ published specifications. We’re an independent ECO Window Systems service provider, not a factory-authorized installer, but we install to their spec sheets so your warranty remains intact. If we spot a pre-existing door defect during install, we’ll document it for your warranty claim before proceeding.
Most common parts like thresholds, weatherstripping, roller assemblies, and lock rods are available within a few days through our local Fountainebleau-area supply chain. Some ECO Window Systems specialty hardware, like multi-point lock bodies, may take one to two weeks. We’ll tell you the real timeline before you commit. For an exact parts estimate, call (727) 620-6983.
If the door slab is solid and the frame is square, repair is almost always cheaper. Bent lock rods, worn rollers, sagging hinges, and failed threshold seals are all repairable for $200 to $600. If the fiberglass is cracked, the door has significant water intrusion damage, or you want to upgrade to impact-rated glass, replacement makes more sense. We’ll give you a straight answer either way.
Yes. Many Fountainebleau homes require impact-rated doors under current Florida Building Code. We install impact-rated ECO Window Systems entry doors and verify the product approval numbers match your municipality’s requirements before we pull the old door. If a permit is required, we handle it.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fountainebleau and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After