Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Shingle, Tile & Metal Roofing in Fountainebleau: What to Know First
CWS shingle, tile, and metal roofing repair in Fountainebleau typically runs $425-$1,850 depending on the damage, and most jobs are completed in one visit once we’ve sourced the right materials. We’re an independent CWS service provider, which means we diagnose what’s actually wrong, quote a fixed price, and stand behind the work with the same Done Right Promise that backs every job Ed Winslow’s name goes on. If you’re a CWS homeowner in Fountainebleau dealing with a leak, lifted shingles, cracked tile, or metal panel separation, call (727) 620-6983 for a free estimate.
This page is for homeowners who already have CWS roofing and want an honest read on what’s failing, what it costs, and whether repair or replacement makes sense. We answer the phone live, 24/7.
How CWS Products Fail - and How We Fix Them
- CWS asphalt shingle delamination along ridges. In Fountainebleau’s afternoon thunderstorms, we regularly see CWS shingle roofs where the manufacturer’s seal strip has let go along ridge lines and hips. Water gets under the shingle, soaks the underlayment, and homeowners don’t notice until a brown spot appears on the ceiling. Our fix is a full ridge re-seal plus replacement of any shingle with cracked tabs, using materials rated for South Florida’s UV index.
- CWS concrete tile spalling at the corners. The freeze-thaw cycle matters less here than salt air and heavy afternoon downpours, but the real culprit we find on Fountainebleau tile roofs is foot traffic. A tile that’s been stepped on near the corner develops hairline fractures that widen with every storm. We pull and replace the compromised tiles, then check the underlayment beneath before reseating them. Skipping the underlayment check is how cheap repairs turn into five-figure problems.
- CWS metal panel oil-canning with fastener backout. On standing seam and exposed-fastener CWS metal roofs, we see more fastener backout in Fountainebleau than manufacturers acknowledge for coastal-adjacent zones. Thermal expansion and contraction works the screws loose over a decade, and once the gasket under the fastener head degrades, water follows. Our repair is panel-by-panel: replace any stripped fastener, swap degraded gaskets, and re-tension panels with the correct torque spec.
- CWS flashing failure at wall transitions. The intersection where a roof meets a stucco wall is the most common leak point on CWS roofs we service in Fountainebleau. The original flashing is often step flashing that’s been caulked over too many times. Caulk fails in two seasons here. We pull the old flashing, install new galvanized or aluminum step flashing correctly lapped, and re-seal with a polyurethane sealant that handles Florida’s wet-dry cycles.
- CWS underlayment rot from deferred maintenance. Under every shingle or tile is a membrane that does the real waterproofing. After 10-14 years of Fountainebleau humidity, even intact-looking CWS roofs can have underlayment that’s dry-rotted at the eaves. We see this most on homes where gutters were never cleaned regularly. The fix is replacing the affected underlayment sections when we do the tile or shingle work, because putting new material over rotted underlayment just hides the problem.
Our CWS Shingle, Tile & Metal Roofing Process
- 1
Call and talk to a person. You call (727) 620-6983. A live person answers. No voicemail loop, no call center. We ask what you’re seeing and schedule the free estimate. No trip charge inside our home county.
- 2
Full attic-to-eave inspection. We walk the roof, inspect the attic from inside, and trace the actual water path. On CWS roofs, we’re checking seal strips, tile seating, fastener integrity, flashing laps, and underlayment condition. We photograph everything so you see what we see.
- 3
Diagnosis in plain English. You get a written explanation of what’s actually failed, why it failed, and what it’ll cost to fix. No vague “roof tune-up” language. If a repair isn’t worth doing, we tell you that.
- 4
Parts decision, made with you. We use OEM CWS materials where they matter for warranty continuity, but we’ll tell you honestly when a high-quality aftermarket underlayment or flashing material outperforms the original spec in Fountainebleau conditions. You get the choice, with real trade-offs explained.
- 5
Repair, test, clean up. We do the work, water-test the repair if needed, and leave your property cleaner than we found it. Uniformed, background-checked techs on every job.
- 6
The Done Right Promise. If it’s not done right, we come back and make it right. That’s Ed’s word on paper, not a wink and a handshake.
What CWS Shingle, Tile & Metal Roofing Costs in Fountainebleau
| Repair Type | Typical Range |
|---|---|
| Single shingle or small tile patch (under 10 sq ft) | $425-$650 |
| Ridge re-seal or flashing repair at one wall | $550-$950 |
| Metal panel fastener replacement and re-tension (per section) | $600-$1,200 |
| Underlayment section replacement (up to 100 sq ft) | $850-$1,850 |
| Full inspection and written condition report | Free with any repair |
What moves the price is access (steep pitch or two-story homes cost more for safety equipment and time), the extent of hidden underlayment damage, and whether we’re matching OEM tile profiles or working with aftermarket options on a discontinued CWS line. We quote fixed prices. You’ll know the number before work starts, and it won’t change unless we find something structural that requires your sign-off. Call (727) 620-6983 for an exact quote on your roof.
Why Fountainebleau Homeowners Call Winslow Windows & Doors for CWS Work
Ed Winslow grew up in Fountainebleau, a few blocks from Tamiami Park, and he still lives in the same zip code he was raised in. When he says his name’s on the door, it’s not a slogan. It’s a fact about a business that’s been locally owned since 2011, with a published address and license number you can verify.
We’ve installed and serviced products from eight authorized brands including PGT, CGI, ES Windows, and ECO Window Systems, so when we tell you a CWS issue is worth repairing rather than replacing, we’re comparing it against other systems we know firsthand. That multi-brand experience means honest repair-vs-replace advice, not a sales pitch. Every technician is background-checked and in uniform. Calls are answered by a live person, 24/7. And our Done Right Promise applies to CWS work just like everything else we touch. If it’s not done right, we make it right.
FAQs
In most cases, no. Independent repairs done correctly with compatible materials do not void a CWS manufacturer warranty on unaffected sections. We use OEM CWS parts where warranty continuity is a concern, and we document the repair so you have a paper trail if you ever need to file a claim. Call (727) 620-6983 and we’ll walk you through what applies to your roof.
We schedule most CWS repairs in Fountainebleau within a few days of diagnosis, and we maintain priority scheduling for active leaks. For a true emergency where water is coming in, call us at (727) 620-6983 and we’ll get someone out to at least tarp and stop the active water intrusion. Estimates are free.
Sometimes, and sometimes not. CWS has shifted its product lines over the years, and certain tile profiles and shingle colors are no longer manufactured. When OEM is available, we source it. When it’s not, we match what’s on your roof as closely as possible with quality aftermarket material and tell you upfront what the visual difference will be before we install it. You’ll never be surprised by a mismatched tile you didn’t approve.
That depends on the age of the roof, the condition of the underlayment, and how many separate leaks are present. If you call us at (727) 620-6983, we’ll inspect and tell you honestly when a repair buys you five more years or when you’re throwing money at a roof that’s already past its service life. The free estimate includes our recommendation, not a pressure pitch.
Yes. We offer $40 off any repair over $200, a free second opinion on any written estimate from another contractor, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. These aren’t limited-time offers. They’re standing commitments, and they apply to CWS work. Mention them when you call (727) 620-6983.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fountainebleau and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After