CGI Custom & Geometric Windows Nationwide | Winslow Windows & Doors

CGI Custom & Geometric Windows in Fountainebleau: What to Know First

We provide independent CGI custom and geometric window service in Fountainebleau, typically completing most repairs within three to five business days once parts arrive. Custom-shaped CGI windows – arches, radius tops, trapezoids, and oversized openings – generally run $900 to $2,800 per opening depending on size, glass package, and whether we’re repairing hardware or replacing the full unit. This page is for Fountainebleau homeowners who own CGI windows and need someone who actually knows the product line, not a generalist guessing at it. Call (727) 620-6983 and you’ll reach a live person, day or night.

Call (727) 620-6983

How CGI Products Fail - and How We Fix Them

CGI builds a solid window. We’ve installed and serviced enough of them in Fountainebleau to know exactly where they wear, and it’s rarely where homeowners expect. Here’s what we actually see in the field:

• Radius and arch windows losing their seal at the bent-glass transition. The Classic and Estate lines both use bent glass for radius tops, and the sealant at the curve is the first thing Fountainebleau humidity attacks. You’ll see fogging that starts at the top of the curve and creeps down. We reseal or replace the insulated glass unit, and we always use fresh structural glazing tape rated for curved-lite applications, not whatever comes off the truck.
• Geometric windows with sashes that bind after settling. Fountainebleau sits on Miami limestone, and slab movement is real. A trapezoid or triangle window that was square five years ago can start binding at the corners. We see it most on CGI’s fixed-geometric lines. The fix isn’t forcing the sash – it’s re-shimming the frame and re-squaring the reveal, then re-bedding the corners.
• Roller and track failures on CGI’s horizontal rolling units used in wide custom openings. The 800 Series rolling windows carry a lot of glass weight, and the original rollers are nylon-tired. After years of Fountainebleau heat-soak, the tires flatten and the window starts dragging. We replace with stainless-steel or reinforced polymer rollers, and we re-check the track alignment so you don’t burn through another set in two years.
• Anchor fatigue on oversized and multi-lite geometric assemblies. Large custom openings – picture windows stacked over operating units or full-height trapezoid banks – put a lot of wind load on the perimeter anchors. During hurricane season, that load cycles and anchors loosen. We pull the interior stops, re-torque or replace anchors, and re-bed the frame to the rough opening.
• Lock misalignment on shaped operating windows. An octagon or hexagon vent window looks great, but the multi-point lock hardware CGI uses has to engage across a non-square geometry. When the corners shift even an eighth of an inch, the lock blocks won’t seat. We re-align the hardware to the mitered corners and test the locking cycle before we call it done.

Our CGI Custom & Geometric Windows Process

When you call us about a CGI window in Fountainebleau, here’s exactly what happens:

1. 1
   We answer the phone. A live person, 24/7. You describe the problem, we ask a few pointed questions, and we schedule the visit. No voicemail loops, no ticket numbers.
2. 2
   On-site diagnostics. We inspect the unit, identify the failure mode, and measure the opening precisely – especially critical for geometric windows where half-inch errors compound across an angle.
3. 3
   Parts decision. We tell you honestly whether OEM CGI parts make sense or a quality aftermarket component will perform as well for less. We never put a part in your window that we wouldn’t put in our own.
4. 4
   The repair, done right. Ed Winslow trains every tech on CGI’s geometry-specific quirks. The work is done in one visit whenever parts are available locally.
5. 5
   We test, then we clean up. We cycle every operable window, check the reveals, verify locking engagement, and leave your home cleaner than we found it.
6. 6
   The Done Right Promise applies. If it’s not done right, we come back and make it right. That’s a century of accountability on every job.

What CGI Custom & Geometric Windows Cost in Fountainebleau

Honest numbers, based on what we’ve actually billed on Fountainebleau jobs:

• Hardware repair on a geometric unit (lock realignment, roller replacement, re-shimming): $180-$480 per opening.
• Seal failure on an arched or radius window (IGU replacement, reglazing): $600-$1,400 depending on glass size and low-E package.
• Full replacement of a custom-shape CGI window (trapezoid, arch, oversized picture): $1,200-$4,500 per opening, driven by dimensions, impact rating, and glass coatings.
• Multi-lite geometric assembly rebuild (anchor re-torque, re-bedding, hardware across multiple units): $800-$2,500.

What moves the price: glass size, whether the unit is impact-rated, curved vs. straight lites, and accessibility. We give you a written line-item quote before any work starts, and the price we quote is the price you pay. Call (727) 620-6983 for a free estimate – there’s no trip charge inside our home county, and we’ll come look even if you just want a second opinion on another contractor’s number.

Why Fountainebleau Homeowners Call Winslow Windows & Doors for CGI Work

Ed’s name is on the door – literally. He grew up a few blocks from Tamiami Park, learned the trade through Miami Dade College’s Building Construction Technology program, and he still lives in the same Fountainebleau zip code he was raised in. That means the CGI window we’re repairing belongs to a neighbor, not a job ticket. We’ve been doing this since 2011, and we carry eight authorized brands – so if a CGI unit isn’t worth saving, we’ll tell you straight and show you comparable options from PGT, CWS, ES Windows, or ECO Window Systems. Every tech who arrives at your door is background-checked and in uniform, you know who’s coming before the truck pulls up. And the Done Right Promise backs every job. A neighbor you can call at 2 a.m. – and someone will actually answer.

FAQs