Entry Doors

Entry Doors in Fountainebleau, FL | Winslow Windows & Doors

Your front door takes more abuse than any other opening in your home. Sun, salt air, afternoon thunderstorms, and the occasional hurricane all converge on Fountainebleau. Our entry doors are built for exactly that. Winslow Windows & Doors supplies and installs Therma-Tru fiberglass and steel entry door systems that carry impact ratings and still look like a proper front door, not a vault hatch. We’ve been installing impact-rated products across Fountainebleau and the surrounding Miami-Dade area long enough to know that a door only performs as well as its installation. Call (727) 620-6983 to talk about your entry door project.

Call (727) 620-6983

Product Overview - Entry Doors

These are not the hollow steel doors you see on apartment buildings. The Entry Doors we install in Fountainebleau homes are engineered entry systems built around two frame materials: fiberglass and steel. Both carry impact ratings. Both are available factory-finished or paint-grade, which means you can match a specific trim color or leave the finishing to the factory line. Fiberglass gives you the look of wood grain without the swelling, warping, and repainting cycle that wood doors go through in Florida humidity. Steel gives you a thinner profile with serious strength, ideal for modern and contemporary elevations you see in newer Fountainebleau builds.

What makes this product line different from a standard entry door is the marriage of impact performance and curb appeal. A hurricane-rated door historically meant ugly. These are the opposite. Decorative glass inserts, clean stiles, and color options that actually suit South Florida architecture. You get a door that meets High-Velocity Hurricane Zone requirements and still welcomes guests properly. That’s the whole point of the line. And because we install these systems ourselves, we know exactly how each component is supposed to go together, from the jamb to the threshold to the perimeter seal.

Technical Specifications

Here’s what the Entry Doors line offers in practical terms. We can walk you through each choice and what it means for your specific opening.

• Frame materials: Fiberglass or steel, depending on your aesthetic and structural preference.
• Maximum width: Up to 48″ wide for a single panel configuration.
• Glass options: Decorative Impact Glass Insert, Low-E Insulated Glass Insert, or No Glass (Solid Panel).
• Color and finish options: White, Black, Bronze, and Paintable Woodgrain Finish.
• Design pressure: Matched to your wind zone, up to +/-100. We don’t sell a pressure rating that exceeds what your zone requires, because it costs money without adding benefit.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration. Verify the exact numbers on your quote.

Hurricane & Compliance Performance

The performance story on these doors comes down to how the glass, frame, and hardware work together when wind pressure and debris hit. Here’s what backs each part of the system.

Laminated Impact Glass
When the glass insert is specified, it’s built with a PVB (polyvinyl butyral) interlayer sandwiched between panes. That interlayer keeps the glass in the frame even when something hits it hard. The window may crack, but it doesn’t blow out and let wind pressure into the house. That’s the failure mode that causes roofs to lift and interiors to be destroyed.

Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Notice of Acceptance and Florida Product Approval documentation. These are not generic. The specific NOA number applies to the exact combination of frame, glass, and hardware you select. We provide the approval numbers on your quote so your permit submittal in Fountainebleau goes through without delay.

FBC / HVHZ Compliance
The Entry Doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the standard that governs Fountainebleau and the rest of Miami-Dade. It’s stricter than what inland Florida requires, and it’s the reason your municipality asks for product approval documentation before a permit is issued.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact, meaning the assembly takes a hit from a piece of debris and must retain structural integrity. TAS 202 applies cyclic wind-pressure loading that simulates wind gusts reversing direction. TAS 203 tests forced-entry resistance. If the configuration you pick has a glass insert, it’s been through this battery.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t oversell ratings here. What matters is that the door you buy is rated for the opening it’s going into, based on where in Fountainebleau you live and what that elevation faces. We calculate that during the quote process, not after.

Energy Performance
Low-E insulated glass inserts are available for homes where the front door gets direct afternoon sun. The Low-E coating reduces heat transfer through the glass, which keeps your entry from turning into a radiator. It’s a good choice for west-facing entries in Fountainebleau. Solid panel doors are the other energy-conscious option if you prefer no glass at all.

Color & Glass Options

Fountainebleau has a mix of housing stock, from mid-century ranches to Mediterranean-inspired two-story homes. The color choices on the Entry Doors line were selected to work across that spread. White is the most common choice for traditional Florida elevations and homes with white trim. Black has become the default for modern farmhouse and transitional styles we’re seeing more of in the neighborhood. Bronze reads well on Mediterranean and Spanish-style homes, pairing nicely with barrel tile and stucco. The paintable woodgrain finish is the one we recommend when you want to match an existing color palette exactly, since your painter can finish it on site.

Glass inserts follow the same logic. Decorative impact glass works on front entries where you want some light and visual interest but don’t want people seeing straight through. The Low-E insulated insert is the pick when energy performance matters and you still want glass. And a solid panel door is the right move if you want maximum privacy, maximum security, and the simplest maintenance profile.

Installation by Winslow Windows & Doors in Fountainebleau

Here’s the part most people don’t think about until something goes wrong. An impact-rated door is only as good as the installation around it. The NOA rating applies to the product as a system, which includes the frame, the anchoring, and the perimeter seal. If the door isn’t set level, plumb, and square, the locks bind, the sweep doesn’t seal, and the whole assembly flexes under wind load in ways it wasn’t tested for.

Our installation practice follows AAMA 2400/2410 standards. We start with a pre-install inspection of the rough opening to check for rot, out-of-square framing, and any water intrusion that already exists. We don’t cover up problems, because a new door installed over a bad opening is a future callback. We set the frame level, plumb, and square, shim and anchor it properly, and then seal the perimeter with AAMA 812 low-expansion foam, which fills the gap without bowing the jamb. After the door is hung and hardware adjusted, we run a water test before we call the job done.

Fountainebleau sits in a coastal exposure zone. That means wind-driven rain is a real thing, and the seal between your door and your house has to hold up. It also means the building department expects proper product approval documentation with your permit submittal. We know what Miami-Dade inspectors look for, and our installs are done with that in mind from the first measurement to the final inspection.

Frequently Asked Questions - Entry Doors

Get a Quote - Entry Doors in Fountainebleau

If you’re replacing an entry door in Fountainebleau, we’ll measure the opening, walk you through the configurations that fit, and give you a written quote with the exact product approval documentation you need for your permit. No pressure, no showroom games. Call (727) 620-6983 to schedule your free on-site measurement and start the project.

Written by the team at Winslow Windows & Doors, serving Fountainebleau, FL and the surrounding Miami-Dade area.