Casement Windows

Casement Windows in Fountainebleau, FL | Winslow Windows & Doors

Casement windows are the side-hinged, crank-operated workhorses of Florida hurricane protection. Instead of sliding on a track, the sash swings outward on heavy-duty hinges and seals against the frame with a full compression gasket. That seal matters here in Fountainebleau, where wind-driven rain and humid air work their way into every gap. We install impact-rated casements across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we’ve been doing it long enough to know which configurations hold up in Miami-Dade’s High-Velocity Hurricane Zone. Call (727) 620-6983 to talk through your project.

Call (727) 620-6983

Product Overview - Casement Windows

Casement windows earn their reputation on two fronts. First, the compression seal. When you crank the sash closed, the sash presses firmly against weatherstripping on all four sides. No sliding track, no fuzzy pile weatherstripping that flattens over time, just a tight mechanical closure that blocks air, water, and noise. That’s the airtight closure we reference in every quote. Second, the venting. Because the sash opens outward, the entire window opening becomes a ventilation path. No half-open compromise like a single-hung. In Fountainebleau, where afternoon sea breezes roll through from the east, casements let you direct airflow into the house rather than fighting a sliding panel for it.

Architecturally, casements fit Florida ranch homes, Mediterranean revival designs, and modern concrete-block builds equally well. They read clean from the street, work well in pairs flanking a picture window, and handle tall, narrow rough openings better than most profiles. We see them specified constantly for kitchens over sinks, where the crank mechanism removes the reach problem, and for bedrooms on the windward side of the house, where the impact rating and compression seal do the heavy lifting.

Technical Specifications

Here’s what we spec when quoting casements in Fountainebleau:

• Frame materials: Extruded aluminum or multi-chamber vinyl. Aluminum wins on strength and slim sightlines; vinyl wins on thermal performance and cost per square foot.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Single-pane laminated impact glass is the entry point for storm protection; insulated laminated units are the standard for homeowners who want impact and energy performance in one lite.
• Finish options: White, almond, bronze, black, and tan. All finishes are factory-applied, not site-painted, so adhesion holds in coastal sun and salt air.
• Screen options: Fixed screens or retractable screens. Retractable screens tuck into the frame when not in use, keeping sightlines clean on street-facing elevations.
• Hardware: Multi-point locking handles standard on impact configurations, plus folding crank handles in matching finishes where specified.
• Design pressure: Matched to your specific wind zone when we spec the project, up to +/-100. We never push a higher DP than the wind zone requires; over-specing adds cost without adding protection.

Hurricane & Compliance Performance

Laminated Impact Glass - The glass package includes a PVB (polyvinyl butyral) interlayer sandwiched between two panes. When a projectile hits, the glass may crack, but the interlayer holds the shattered pieces in place and keeps the opening closed. That’s the whole point: the window stays in the frame, and the envelope stays sealed.

Miami-Dade NOA / Florida Product Approval - Every casement configuration we quote carries a Notice of Acceptance or Florida Product Approval number, issued per configuration. We’ll list the specific numbers on your quote so your permitting package is complete before we pull the first frame. Verify the exact numbers on the quote you receive, because approvals are configuration-specific.

FBC / HVHZ Compliance - These casements are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ isn’t a suggestion; it’s the building standard for Miami-Dade and Broward, and everything we install in Fountainebleau meets it without exceptions or workarounds.

TAS 201 / 202 / 203 Testing Context - The HVHZ protocol family includes TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These are the tests that simulate what a hurricane actually does: throw debris at the glass, then hammer the window with pulsing wind pressure, then try to pry it open. Products rated for HVHZ pass all three.

Design Pressure for Your Wind Zone - Design pressures matched to your wind zone, up to +/-100, never higher. Fountainebleau sits inland enough to avoid the harshest coastal exposure bands, but close enough to the Atlantic that wind zone boundaries shift block by block. We check the map, not a generic chart.

Energy Performance - Low-E and insulated glass options are available for homeowners who want storm protection and lower cooling costs in the same package. Low-E coatings reduce solar heat gain during Fountainebleau’s long shoulder seasons, and argon-filled insulated units cut conductive heat transfer at the glass, which is where most thermal loss happens.

Color & Glass Options

Color choice matters more in Florida than most people expect. Dark bronze and black frames absorb more solar heat, which can stress seals and hardware over time, but they offer the strongest contrast on white stucco and Mediterranean elevations. White and almond are the workhorse finishes in Fountainebleau; they read clean on older concrete-block homes and don’t fight with existing trim. Tan splits the difference, warm without going dark, and it hides salt residue better than white on homes within sight of the water. Aluminum frames carry all five finishes; vinyl runs white and almond in most configurations.

On the glass side, laminated impact glass with a PVB interlayer is the baseline for storm protection. Clear laminated is the budget-friendly choice for windows that don’t get direct afternoon sun. Low-E insulated impact glass is our most requested upgrade in Fountainebleau, because it handles the storm season and the electric bill in one product. Tinted glass works well on west-facing elevations where afternoon glare is brutal, but it changes interior light color, so we recommend seeing a sample before ordering.

Installation by Winslow Windows & Doors in Fountainebleau

We install every casement window using the same process, whether it’s one opening or forty. The unit gets inspected before it ever goes in the rough opening. Frame squareness, glass integrity, hardware operation, gasket sealing, all checked at the shop and again on site. If something’s wrong, we don’t install it and pretend it’ll be fine. We send it back.

On installation day, the rough opening gets cleaned and checked for level, plumb, and square. We shim the frame into place carefully, anchoring it per the manufacturer’s approved fastening schedule and the engineering from the NOA. Perimeter sealing is done with AAMA 812 low-expansion foam sealant, followed by a properly tooled exterior sealant joint. The installation practice follows AAMA 2400/2410 standards throughout, which govern how windows are installed and flashed to prevent water intrusion around the frame, not just through it.

Fountainebleau permitting requires an HVHZ-compliant product submittal, which includes the NOA or Florida Product Approval documentation for the specific configuration you’re buying. We prepare that package as part of every quote, and we know the local building department’s submission requirements well enough to avoid first-round rejections. After install, we test the operation, run a water check on critical openings, and only then call the job done. Improper installation compromises even the best NOA-rated system, which is why we hold our install crews to the same standard the manufacturer holds the product.

Frequently Asked Questions - Casement Windows

Get a Quote - Casement Windows in Fountainebleau

If you’re replacing windows in Fountainebleau or planning a new build, we’ll spec the right casement configuration for your wind zone, your budget, and your elevation. Free on-site measurements, a written line-item quote, and a permitting package included. Call (727) 620-6983 to start.

Written by the team at Winslow Windows & Doors, serving Fountainebleau and greater Miami-Dade County with hurricane-impact window and door installation since 2011.