Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Fountainebleau, FL
Custom & Geometric Windows - octagons, arches, circles, trapezoids, and custom angles - are installed in Fountainebleau homes to fill architectural openings that standard rectangular units simply cannot fit. At Winslow Windows & Doors, we measure, order, and install these windows to exact tolerances, matching impact ratings and energy performance to the rest of your home’s envelope. Call us at (727) 620-6983 and a live person will pick up, any hour of the day.
Fountainebleau’s housing stock runs a wide range - mid-century ranch homes with decorative transoms, 1990s Mediterranean-revival builds with Arched & Curved Windows above the entry, and newer construction with floor-to-ceiling trapezoids flanking two-story foyers. Each of those openings needs a window fabricated to its exact shape, not shimmed and caulked into something close. That distinction matters in Miami-Dade County, where wind-load and impact requirements are among the toughest in the country. A shaped window that doesn’t meet Miami-Dade Notice of Acceptance (NOA) standards is a code problem waiting to become a storm problem.
Ed Winslow has been handling exactly these kinds of installations in Fountainebleau since Winslow Windows & Doors opened in 2011. As part of our broader Custom & Geometric Windows in Fountainebleau service, shaped window work is something we do on its own or alongside a full window replacement project. Either way, Ed’s name is on the job - and that means it gets done right.
When You Need Geometric & Shaped Windows
- You have a shaped opening with a failing or missing window. Arched and circular openings in older Fountainebleau homes - particularly those built along the NW 7th Street corridor in the 1970s and 1980s - often have original jalousie or single-pane inserts that are past their useful life. A new shaped unit restores the opening properly and brings it up to current code.
- Your existing shaped window failed a post-storm inspection. After hurricane season, Miami-Dade inspection crews flag non-impact glazing in permit-required openings. A geometric window that isn’t impact-rated can hold up a closing or trigger a homeowner’s insurance surcharge in Fountainebleau.
- You’re building an addition and the architect spec’d a non-standard shape. New construction and room additions in Fountainebleau frequently include eyebrow windows, transom arches, or angled clerestory units. These need to be ordered custom and installed to the framing spec - not cut from a stock panel.
- Your shaped window leaks or condenses heavily on the interior glass. South Florida’s humidity is relentless, and a shaped window with a failed seal becomes a condensation trap fast. In Fountainebleau, we regularly see fogged insulated glass units in arched windows because the original installer used a rectangular IGU trimmed to shape rather than a unit fabricated for the opening.
- You’re replacing all your windows and want the geometric pieces to match. If you’re upgrading to impact glass throughout, the shaped windows need to match the line, frame color, and performance rating of the rectangular units. Mismatched performance is a weak point in the building envelope.
- The current window doesn’t meet Miami-Dade NOA requirements. Fountainebleau sits in Miami-Dade County’s High-Velocity Hurricane Zone (HVHZ). Any window in a regulated opening - including decorative geometric shapes - must carry a valid NOA. If yours doesn’t, you’re out of compliance regardless of how the window looks from the street.
Our Geometric & Shaped Windows Process
- On-site measurement and opening assessment. We start with a visit to your Fountainebleau home to field-measure the rough opening - not just the glass area, but the full frame dimension, the depth of the opening, and the plane of the surrounding wall. Shaped windows have no margin for a close-enough measurement. An arch that’s off by a quarter inch at the spring point won’t seat flush, and in an HVHZ installation that’s a code failure. We document the opening with photos and notes before anything is ordered.
- Product selection and NOA verification. We match the opening to the right product from our authorized brand lineup. For shaped impact windows, ECO Window Systems both offer strong custom fabrication programs that cover Miami-Dade’s HVHZ requirements. We confirm NOA compliance before the order goes in - not after the window arrives on a truck. We’ll walk you through frame color, glass type, and any low-E or tint options that make sense for a Fountainebleau home’s west- or south-facing exposure.
- Factory order with your confirmed specs. Custom shaped windows are not a stocked item - they’re fabricated to order. Lead times from our suppliers typically run three to six weeks depending on complexity and current production schedules. We give you a realistic timeline at the point of order, not an optimistic number that we quietly extend later. Upfront pricing is locked at this stage too - no surprises on the invoice.
- Permit pull and scheduling. In Miami-Dade County, replacing a window in a regulated opening requires a permit. We handle the permit application, coordinate with the county, and schedule the installation around the inspection timeline. Homeowners in Fountainebleau sometimes assume a small geometric window doesn’t need a permit - it usually does, and skipping it creates title and insurance problems down the road.
- Installation by background-checked, uniformed technicians. Our crew arrives in uniform, with identification, on the scheduled date. Shaped window installation requires careful handling - arched units in particular are heavy and fragile at the corners, and the installation sequence (flashing, sealant, fastener spacing) differs from a standard rectangular install. We follow manufacturer specs and Miami-Dade NOA installation requirements precisely, because those requirements exist for a reason.
- Final inspection and walkthrough. After installation, we walk you through the finished work, test operability if the window opens, check the seal perimeter, and confirm the inspection is scheduled. The Done Right Promise covers every job we do: if something isn’t right, we come back and fix it. That’s not a standard contractor warranty - it’s Ed’s word, backed by fifteen years of standing behind work in this area.
Geometric & Shaped Windows Pricing in Fountainebleau
Geometric and shaped windows cost more than comparable rectangular units - that’s simply the reality of custom fabrication, and any quote that says otherwise is leaving something out. In the Fountainebleau market, pricing is also shaped by Miami-Dade’s HVHZ requirements, which limit your options to NOA-compliant products. Here’s a realistic range based on what we see on jobs in this area:
| Window Type | Approximate Installed Price Range |
|---|---|
| Small fixed geometric (circle, octagon, under 24″) | $420 – $750 per unit |
| Half-round or quarter-round arch (24″-48″ wide) | $650 – $1,150 per unit |
| Large half-round or full arch (over 48″ wide) | $1,100 – $2,200 per unit |
| Trapezoid or parallelogram (standard foyer size) | $700 – $1,400 per unit |
| Complex custom shape (multiple angles, large format) | $1,500 – $3,500+ per unit |
| Permit (Miami-Dade, typical residential) | $150 – $350 depending on valuation |
Several factors push a price toward the higher end of these ranges in Fountainebleau:
- Impact glazing requirement. HVHZ-rated laminated glass adds meaningful cost over standard insulated glass - but it’s not optional in Miami-Dade County, and it’s the reason your home survives a storm with the glass intact.
- Frame depth and wall condition. Some Fountainebleau homes, especially those built in the 1960s and early 1970s, have thicker concrete block walls. A deeper frame or a custom sub-sill may be needed to properly seat the window and flash the opening.
- Complexity of the shape. A true circle or a multi-sided polygon requires more fabrication time than a simple half-round. Angles that don’t fall on standard increments add cost.
- Finish and glass options. Low-E coatings and bronze or dark bronze frames cost more than clear glass and white frames, but both are worth considering for Fountainebleau’s western and southern exposures where afternoon heat gain is significant.
Seniors and veterans receive a permanent 10% discount on all work. If you already have a written estimate from another company, we offer a free second opinion - no trip charge within Miami-Dade County. Call (727) 620-6983 for an exact quote; estimates are free and we don’t require a deposit to measure.
FAQs - Geometric & Shaped Windows
Do geometric windows in Fountainebleau need to be impact-rated?
Yes - any window installed in a regulated opening in Fountainebleau must meet Miami-Dade County’s High-Velocity Hurricane Zone requirements, and that applies to shaped and geometric windows the same as rectangular ones. The window must carry a valid Notice of Acceptance (NOA) for the HVHZ. A decorative circle or arch above a front door is still a penetration in the building envelope; under wind pressure, an unrated unit can fail and allow water and debris intrusion. We only install NOA-compliant products in Fountainebleau - non-compliant units aren’t something we’ll put in, because the liability to you as a homeowner is real. Call (727) 620-6983 if you’re unsure whether your existing shaped windows are rated.
How long does it take to get a custom geometric window made and installed?
Custom shaped windows typically take three to six weeks from the confirmed order to delivery in the Fountainebleau area, depending on the fabricator’s current lead time and the complexity of the shape. Add one to two weeks for permit processing in Miami-Dade County, and you’re looking at a realistic total timeline of five to eight weeks from signed contract to final inspection. We give you a specific estimate at the time of order, not a vague range we extend later. For jobs replacing multiple geometric units alongside a full window replacement, we coordinate the order and permit to minimize disruption to your schedule.
Can you match a geometric window to the rest of my windows if I’m replacing everything?
Yes, and matching them is something we plan from the start. When a Fountainebleau homeowner is doing a full replacement, we spec the geometric units to the same product line, frame color, and glass package as the rectangular windows so the finished project looks like one decision, not a patchwork. ECO Window Systems both offer custom fabrication programs that align with their standard residential lines, which makes color and profile matching straightforward. The key is ordering everything together or confirming the spec before the rectangular units go in. Call us early in the process - retrofitting a mismatched arch after the rest of the project is done costs more than getting it right the first time.
What shapes can you install in Fountainebleau homes?
We install circles, half-rounds, quarter-rounds, full arches, octagons, hexagons, trapezoids, parallelograms, triangles, and compound shapes with multiple angles - essentially any shape a manufacturer can fabricate to HVHZ standards. The practical limit isn’t the shape itself but whether the product can carry a valid Miami-Dade NOA for that geometry and size. Oversized Openings or highly unusual custom shapes may require an engineer’s letter in addition to the NOA for the permit to be approved in Miami-Dade County. We flag those situations at the measurement stage so there are no surprises mid-project. Reach out at (727) 620-6983 and we’ll tell you exactly what’s possible for your specific opening.
Why Fountainebleau Homeowners Call Winslow
There’s no shortage of window companies operating in the Miami area, but most of them treat shaped windows as a side item - something they’ll figure out when the order comes back wrong. Ed Winslow has been measuring and installing Custom Impact Windows in Fountainebleau since 2011, and the details that trip up other contractors are things we handle as a matter of routine: Miami-Dade NOA verification before the order goes in, permit coordination with the county, correct flashing for concrete block construction, and installation sequences that satisfy the NOA requirements.
We’re authorized installers for ECO Window Systems, both of which offer custom fabrication programs suited to the geometric work Fountainebleau homes need. You won’t get a product we’re not authorized to install, and you won’t get a price that changes after you’ve signed.
The Done Right Promise means that if something isn’t right about a job we did, we come back and fix it. That’s not a warranty card you file somewhere - it’s Ed’s word, and it applies to every shaped window we install in Fountainebleau. Our broader home service includes windows, doors, and roofing across South Florida, and geometric window work is one of the things we take most seriously because the margin for error is so small.
Seniors and veterans always get 10% off. There’s no trip charge for homes in Miami-Dade County. And when you call (727) 620-6983, a real person answers - not a voicemail, not a call center, not a next-business-day callback. Any hour.
Key Takeaways
- Geometric and shaped windows in Fountainebleau must carry a Miami-Dade NOA for the HVHZ - this applies to every shape, including decorative arches and circles.
- Custom fabrication takes three to six weeks; plan for five to eight weeks total with Miami-Dade permitting.
- Installed prices in Fountainebleau run roughly $420 to $3,500+ per unit depending on size, shape, and glass specification.
- Winslow Windows & Doors has handled geometric window installations in Fountainebleau since 2011, authorized to install ECO Window Systems.
- The Done Right Promise covers every job. If it’s not right, we fix it.
- Seniors and veterans receive a permanent 10% discount. Free second opinions on written estimates. No trip charge in Miami-Dade County.
Get a Free Estimate for Geometric Windows in Fountainebleau
If you have a shaped opening that needs a new window - or an existing geometric unit that’s fogged, leaking, or out of compliance - call Winslow Windows & Doors at (727) 620-6983. Ed Winslow and our team serve Fountainebleau and the surrounding Miami-Dade area, and we’ll come out to measure at no charge. Upfront pricing, no surprises, and someone will answer when you call. That’s been our standard since 2011, and it’s not changing.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fountainebleau since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.